IT代考 SEHH2238 : Computer Networking Session 5 : MAC_Protocols

Lab/Tutorial :
SEHH2238 : Computer Networking Session 5 : MAC_Protocols
1. There are three stations A, B and C in a bus network with the following data packets to be transmitted.
Packet Length

Copyright By PowCoder代写 加微信 powcoder

10 minutes
Ready time (at)
Backoff Time
10 minutes
Assume the propagation delay is negligible and the source station can receive the acknowledgement from the destination station immediately after the packet transmission. At what time will the packets successfully finish their transmissions in each of the following cases? You should write down individual finish time for each packet and explain your answer with the aid of timing diagrams.
a) The network adopts 1-persistent CSMA protocol with different constant backoff time for each station (as indicated in the table).
b) The same as (a) but now the network adopts 1-persistent CSMA/CD protocol. Further assume that the station can detect packet collisions and stop transmission within 2 minutes after the beginning of transmission.
c) The same as (a) but now the network adopts non-persistent CSMA protocol.
2. In a CSMA/CD network with a data rate of 10 Mbps, the minimum frame size is found to be 512 bits for the correct operation of the collision detection process. What should be the minimum frame size if we increase the data rate to 100 Mbps? To 1 Gbps? To 10 Gbps?
3. Referring to the Figure (12.11 where the network should be in a bus topology), the data rate is 10 Mbps, the distance between station A and station C is 2000m, and the propagation speed is 2 x 108m/s. Station A starts sending a long frame at time t1 = 0; station C starts sending a long frame at time t2 = 3 s. The size
of the frame is long enough to guarantee the detection of collision by both stations. Find:
a) The time when station C hears the collision (t3).
b) The time when station A hears the collision (t4).
c) The number of bits station A has sent before detecting the collision.
d) The number of bits station C has sent before detecting the collision.
4. Repeat Q3 if the data rate is 100 Mbps.
SEHH2238 Computer Networking Tutorial 5 Page 1

程序代写 CS代考 加微信: powcoder QQ: 1823890830 Email: powcoder@163.com