程序代写代做代考 RISC-V assembler mips compiler Java cache algorithm x86 graph computer architecture assembly Compilers and computer architecture: The RISC-V architecture

Compilers and computer architecture: The RISC-V architecture
Martin Berger 1 November 2019
1Email: M.F.Berger@sussex.ac.uk, Office hours: Wed 12-13 in Chi-2R312
1/1

Recall the function of compilers
2/1

Introduction
In previous lectures, we focussed on generating code for simple architectures like the stack machine, or accumulator machines.
Now we want to do something more interesting, generating code for a real CPU.
We focus on the RISC-V (family of) processor(s).
3/1

CISC vs RISC
Processors can roughly be classified as
􏰀 CISC(complexinstructionsetcomputer) 􏰀 RISC(reducedinstructionsetcomputer)
What is the instruction set?
4/1

Instruction set architecture
In a CPU we distinguish between
􏰀 Instructionsetarchitecture,thatisexternallyvisible aspects like the supported data types (e.g. 32 bit Ints, 80 bit floats etc), instructions, number and kinds of registers, addressing modes, memory architecture, interrupt etc. This is what the programmer uses to get the CPU to do things.
􏰀 Microarchitecture,whichhowtheinstructionsetis implemented. The microarchitecture is not visible to the programmer, and CPUs with different microarchitectures can share a common instruction set. For example Intel and AMD support very similar instruction sets (x86 derived) but have very different microarchitectures. The programmer can ignore this, this is for the hardware people.
5/1

Recall:
6/1

Instruction set architecture
There is a semantic gap between high-level programming languages and machine languages: the former have powerful features (e.g. method invocation) that translate to a large number of simple machine instructions.
In the past it was thought that making machine commands more powerful would close or narrow the semantic gap, making compiled code faster. Examples of powerful machine commands include directly enabling constructs such as procedure calls, or complicated array access in single instructions.
CPUs with such instruction sets are called CISC (complex instruction set computer). Complex because the instructions do complicated things and are complex to implement in hardware.
7/1

Instruction set architecture
In some cases CISC architectures led to faster compiled code. But in the 1970s researchers began to study instruction set architecture and compiled code carefully and noticed two things.
􏰀 Compilersrarelymakeuseofthecomplexinstructions provided by CISC machines.
􏰀 Complexoperationstendedtobeslowerthanasequence of simpler operations doing the same thing.
􏰀 Oftenreal-worldprogramsspendmostoftheirtime executing simple operations.
􏰀 Implementingcomplexoperationsleadstocomplicated CPU architecture that slow down the execution of simple instructions. Worse: simple operations are slower even when you don’t use the complex operations.
8/1

RISC
These empirical insights lead to a radical rethink of instruction set architecture.
Optimise as much as possible the few instructions that are used the most in practise. Try and make them exceedingly fast.
This makes the task of the compiler (much) harder, but the compiler has to compile a program only once, whereas the CPU would have to support complex instructions all the time.
9/1

RISC
RISC processors like RISC-V are the outcome.
One key feature of RISC is that external memory was only accessible by a load or store instruction. All other instructions were limited to internal registers. Hence RISC is also called load/store architecture.
This drastically simplifies processor design: allowing instructions to be fixed-length, simplifying pipelines, and isolating the logic for dealing with the delay in completing a memory access (cache miss, etc.) to only two instructions.
10/1

RISC vs CISC today
Despite RISC being technically better, still the most popular desktop/server family of chips (Intel x86) is not RISC. (Phones are dominated by RISCish architectures (ARM).) Reasons:
􏰀 Largeamountoflegacyx86code(e.g.Microsoftproducts), locking PC users into x86 CISC. x86 has been backwards compatible back to the 8080 processor (1974).
􏰀 IntelearnsmuchmoremoneythanproducersofRISC chips so can spend much more on research, design and manufacturing, keeping CISC chips competitive with RISC.
􏰀 ’Underthehood’modernIntelprocessorsarealsoRISC: the complicated x86 machine instructions are translated at run-time into much simpler underlying RISC microcode (which is not user-visible).
􏰀 BothARMandx86providededicatedinstructionsfor cryptography (AES).
11/1

Aside: extreme RISC
Sometimes a workload is so extremely skewed towards certain commands that it makes sense to abandon traditiona CPU architecture (including RISC) and use special purpose processors.
􏰀 GPUs(graphicsprocessingunit)whichexplorethe unusually high degree of SIMD parallelism of most graphics and image processing algorithms.
􏰀 Bitcoinleadtodedicatedchipsthatcomputenothingbut SHA256.
􏰀 Google’sTPU(TensorProcessingUnits)forspeedingup computation in neural nets (typically 15x – 30x vs GPU), and more energy efficient (70x vs GPU, 200x vs CPU). Basically matrix multiplication and activation function engine. Currently a lot of work in this space.
12/1

The RISC-V processor
The original RISC processor was MIPS, John Hennessy in Stanford. For various reasons it has been replaced by RISC-V!
RISC-V is open source and has an extremely clean and simple design. For those reasons it has emerged as a serious competitor to ARM.
Several industrial strength compilers to RISC-V exist, including LLVM and GCC.
13/1

The RISC-V processor
In its basic from, RISC-V has 32 integer registers. RISC-V is a load-and-store architecture, meaning:
Except for memory access instructions, instructions address only registers.
14/1

RARS
I recommend using a RISC-V simulator like RARS for learning RISC-V.
15/1

Getting RARS
Homepage: https://github.com/TheThirdOne/rars Download *.jar at https://github.com/TheThirdOne/
rars/releases/download/v1.3.1/rars1_3_1.jar Easy to launch: java -jar rars1_3_1.jar
Has useful online help.
16/1

RARS
You need to learn RARS by yourself and in tutorials.
17/1

RISC-V
Here is a basic overview of RISC-V. We’ll only cover issues that are relevant for code generation. You are expected to familiarise yourself with RISC-V programming on your own.
This should not be difficult with RARS, as RISC-V is an exceptionally clean architecture.
18/1

RISC-V registers
RISC-V has the following registers (all are 32 bits).
􏰀 32generalpurposeregisters 􏰀 Aprogramcounter(PC)
19/1

RISC-V registers
CPU general-purpose registers have assigned functions:
􏰀 x0ishard-wiredto0,andcanbe used as target register for any instruction whose result is to be discarded. x0 can also be used as a source of 0 if needed.
􏰀 x1-x31aregeneralpurpose registers. The 32 bit integers they hold are interpreted, depending on the instruction that access the registers. (Examples: Boolean values, two’s complement signed binary integers or unsigned binary integers, stack pointer or return address).
20/1

RISC-V registers: PC
The program counter (PC) register, points to the instruction to be executed next. The PC cannot directly be written or read using load/store instructions. It can only be influenced by executing instructions which change the PC as a side-effect.
21/1

RISC-V registers: do you notice something?
No explicit SP (and no push, no pop commands)
Can be simulated with general purpose register and normal commands.
22/1

RISC-V registers: usage conventions
Interesting for us mostly x1 (ra), x2 (sp), x8 (s0)
Note that those are usage conventions. I recommend adhering to them if you want to interface with other RISC-V software (e.g. assembler).
23/1

RISC-V Datatypes
RISC-V has address space of 232 bytes for all memory accesses.
Address space is circular, so that the byte at address 232 − 1 is adjacent to the byte at address zero.
Memory is byte-addressable.
A word of memory is defined as 32 bits (4 bytes). A halfword is 16 bits (2 bytes).
A byte 8 bits.
24/1

RISC-V memory alignment
RISC-V has fixed-length 32-bit instructions that must be aligned on 32-bit boundaries (i.e. at memory locations divisible by 4).
But … Accessed memory addresses need not be aligned, but accesses to aligned addresses may be faster; for example, simple CPUs may implement unaligned accesses with slow software emulation driven from an alignment failure interrupt.
The assembler will help you with alignment. We come back to this.
25/1

RISC-V instructions
CPU instructions are organized into the following functional groups:
􏰀 Loadandstore(memoryaccess)
􏰀 Immediates(handlingofconstants)
􏰀 Computational(e.g.integerarithmeticandbooleanlogic) 􏰀 Jumpandbranch(conditionalandunconditional)
􏰀 Manyothers(e.g.SIMD,vectoring)
Each instruction is 32 bits long in memory.
Important: RISC-V processors use a simple load/store architecture; all operations (e.g. addition, comparison) are performed on operands held in processor registers.
Main memory is accessed only through load and store instructions.
26/1

RISC-V instructions
The command
lw reg1 offset(reg2 )
(where offset is a 16-bit integer) adds the content reg2 and the 16 bit value offset, obtaining a new number n, and then looks up the 32 bit value stored in memory at n. That value is then loaded into register reg1 as a signed integer.
The sum of reg2 and offset must be word aligned (i.e. the two least significant bits must be 0), otherwise an error will occur.
27/1

RISC-V instructions
r0 r1 r2 r3 r31 2000 …
lw r2 100(r3)
pc
… 17 2100
r0 r1 r2 r3 r31 17 2000 …
lw r2 100(r3)
… 17 2100
pc
28/1

RISC-V instructions
The command
add reg1 reg2 reg3
Adds the contents of registers reg2 and reg3, and stores the result in reg1.
Note that the reg1, reg2 and reg3 don’t have to be distinct.
29/1

RISC-V instructions
30/1
r0 r1 r2 r3 r31 666 999 …
add r1 r2 r3
pc

r0 r1 r2 r3 r31 1665 666 999 …
add r1 r2 r3

pc

RISC-V instructions
The command
sw reg1 offset(reg2 )
(where offset is an integer) stores the 32 bit word currently in reg1 at the address obtained by adding the 16 bit value offset to the content of register reg2.
The sum of reg2 and offset must be word aligned (i.e. the two least significant bits must be 0), otherwise an error will occur.
31/1

RISC-V instructions
r0 r1 r2 r3 r31 33 2000 …
sw r1 100(r2)
pc

2100
r0 r1 r2 r3 r31
33 2000 sw r1 100(r2)

… 33
2100
pc
32/1

RISC-V instructions
The command
addi reg1 reg2 imm
Adds the 16 bit signed integer imm to the word currently in reg2, storing the result in register reg1. Here the ’u’ in addiu means unsigned. In first approximation that means overflow is not checked when adding (no error is caused by overflowing).
Not checking overflow is useful e.g. when you want ’wrap around’ a sum at 0 or 232 − 1. You want this e.g. when doing cryptography. In addition we consider e.g. the SP an unsigned integer.
But imm is signed, so we can increment and decrement e.g. the SP.
33/1

RISC-V instructions
34/1
r0 r1 r2 r3 r31 2000 …
addi r1 r2 55
pc

r0 r1 r2 r3 r31
2055 2000 addi r1 r2 55
pc

RISC-V instructions
The pseudo instruction li reg imm
Stores the 32 bit integer imm in register reg.
It is a pseudo instruction in that there is no RISC-V assembly command that directly implements this (MPIS cannot load 32 bit words directly), instead the RISC-V assembler will automatically expand li reg imm into a sequence of real assembler commands. When compiling you can easily treat pseudo instructions as real instructions.
35/1

RISC-V instructions
36/1
r0 r1 r2 r3 r31 …
li r2 123
pc

r0 r1 r2 r3 r31
123

li r2 123

pc

Our first RISC-V program
Let’s write the program 7+5, we want the result in register r5.
li r6 7
li r5 5
add r5 r5 r6
37/1

Our second RISC-V program
Let’s write 7+5, in accumulator machine form. 􏰀 Oneargumentisintheaccumulator.
􏰀 Remainingargumentsonthestack.
􏰀 Resultshouldbeinaccumulator.
Recall RISC-V doesn’t have an explicit SP. Also: no explicit accumulator!
We must simulate both, and that is easy: each register can be used as SP or as accumulator.
38/1

Our second RISC-V program
Let’s write 7+5, in accumulator machine form.
Convention: we use register x2 as stack pointer, and register
x10 as accumulator.
It is customary in RISC-V assembly to write sp for the stack pointer (r29) and a0 for register r4.
39/1

Our second RISC-V program
Recall that in the accumulator machine model, memory operations work only via the accumulator. With this in mind, here is the program 7+5 we are seeking to translate to RISC-V in pseudo-code.
acc <- 7 push acc acc <- 5 acc <- acc + top of stack pop 40/1 Our second RISC-V program To translate acc <- 7 push acc acc <- 5 acc <- acc + top of stack pop into RISC-V we adhere to the conventions that 􏰀 Thestackgrowsdownwards(i.e.fromhightolow addresses). 􏰀 Thestackpointersppointstothefirstfreememorycell below (in terms of addresses) the top of the stack. 41/1 Our second RISC-V program 􏰀 Thestackgrowsdownwards(i.e.fromhightolow addresses). 􏰀 Thestackpointersppointstothefirstfreememorycell below (in terms of addresses) the top of the stack. 1500 1496 1492 1488 1484 Top of stack element 166 99 66 22 ... SP = 1484 42/1 Our second RISC-V program acc <- 7 push acc acc <- 5 acc <- acc+topOfStack pop li a0 7 sw a0 0(sp) addi sp sp -4 li a0 5 lw t1 4(sp) add a0 a0 t1 addi sp sp 4 Note that the program on the right is really doing almost exactly what we did a few weeks ago when we looked at the accumulator machine, except that 􏰀 weuseatemporaryt1 􏰀 weuseRISC-Vassembly 􏰀 wehavetoadjustthestack’byhand’,ratherthanusing built-in push and pop 43/1 RISC-V We will soon write a compiler that compiles a simple language with procedures to RISC-V code. To understand this, you need to familiarise yourself with RISC-V in the tutorials and in self study. RISC-V machine code is really straightforward, and not really different from the pseudo machine code we used a few weeks back, except that the assembler syntax is slightly different. 44/1 Interlude on (RISC-V) assembler Assembler language is a programming language that is close to machine language but not the same. Why bother with yet another language? Why not program straight in machine language? 45/1 That’s why 001001111011110111111111111000001010111110111111000000 000001010010101111101001000000000000100000101011111010 010100000000001001001010111110100000000000000001100010 101111101000000000000000011100100011111010111000000000 000111001000111110111000000000000001100000000001110011 100000000000011001001001011100100000000000000000010010 100100000001000000000110010110101111101010000000000000 011100000000000000000001111000000100100000001100001111 110010000010000100010100001000001111111111110111101011 111011100100000000000110000011110000000100000100000000 000010001111101001010000000000011000000011000001000000 000000111011000010010010000100000001000011000010001111 101111110000000000010100001001111011110100000000001000 000000001111100000000000000000100000000000000000000001 000000100001 46/1 That’s why Here is same code written in assembly language, but no symbolic labels are used as name of registers or memory locations. addi $29, $29, -32 sw $31, 20($29) sw $4, 32($29) sw $5, 36($29) sw $0, 24($29) sw $0, 28($29) lw $14, 28($29) lw $24, 24($29) multu $14, $14 addi $8, $14, 1 slti $1, $8, 101 sw $8, 28($29) mflo $15 addu $25, $24, $15 bne $1, $0, -9 sw $25, 24($29) lui $4, 4096 lw $5, 24($29) jal 1048812 addi $4, $4, 1072 lw $31, 20($29) addi $29, $29, 32 jr $31 move $2, $0 47/1 That’s why It gets even better with symbolic names such as sp or loop. .text .align 2 .globl main main: subu sp, sp, 32 sw ra, 20(sp) sd a0, 32(sp) sw 0, 24(sp) sw 0, 28(sp) loop: lw t6, 28(sp) mul t7, t6, t6 lw t8, 24(sp) str: addu t9, t8, t7 sw t9, 24(sp) addu t0, t6, 1 sw t0, 28(sp) ble t0, 100, loop la a0, str lw a1, 24(sp) jal printf move v0, 0 lw ra, 20(sp) addu sp, sp, 32 jr ra .data .align 0 .asciz "The sum from 0 .. 100 is %d\ 48/1 Assembler vs assembly language We must carefully distinguish between 􏰀 Assemblylanguage,thesymbolicrepresentationofa computer’s binary machine language. 􏰀 Assembler,aprogram(amini-compiler)thattranslates assembly language into real machine code (long sequences of 0s and 1s). 49/1 Assembler, the program The assembler primarily does two things. 􏰀 Translate commands in assembly language like addi t3 t6 t8 into machine code. 􏰀 Convertsymbolicaddressessuchasmainorloopinto machine addresses such as 100011010011010011010011010101001. This task is sometimes deferred to the linker. The symbolic addresses in assembly language name commonly occurring bit patterns, such as opcodes and register names, so humans can read and remember them. In addition, assembly language permits programmers to use labels to identify and name particular memory words that hold instructions or data, or that the program can jump to. 50/1 Assembler, the program Source files are produced by a compiler. They may contain labels that are not defined in the source file, reference to external code (e.g. print). 51/1 Source file Source file Source file Assembler Assembler Assembler Object file Object file Object file Linker Library Executable Assembler, the program Assembler translates source files to object files, which are machine code, but contains ’holes’ (basically references to external code). Because of holes, object files cannot be executed directly. The holes arise because the assembler translates each file separately. 52/1 Source file Source file Source file Assembler Assembler Assembler Object file Object file Object file Linker Library Executable Assembler, the program The linker gets all object files and libraries and puts the right addresses into holes, yielding an executable. 53/1 Source file Source file Source file Assembler Assembler Assembler Object file Object file Object file Linker Library Executable Assembler, the program Here is an example of using names: main is a global name in the sense that other programs can use it. OTOH loop is a local name: it can only be used (jumped to) inside this program. .text .align 2 .globl main main: subu sp, sp, 32 sw ra, 20(sp) ... loop: lw t6, 28(sp) ... ble t0, 100, loop It is the declaration (assembler directive) .globl main that makes main global. 54/1 Assembler, the program The assembler processes a source file line by line, translating assembly commands. It keeps track of the size of each command. loop: subu sp, sp, 32 sw ra, 20(sp) When the assembler encounters a line starting with a label, like loop: ... it calculates what address in memory the command just below would be at, and stores the pair of label and address in its symbol table. If it encounters this label later, e.g. ble t0, 100, loop, the assembler replaces the label with the address (if local, otherwise the linker does this). 55/1 Helpers Assembly languages typically offer various features making assembly programming easier. Here are some RISC-V examples. 􏰀 Datalayoutdirectives 􏰀 Pseudoinstructions 􏰀 Alignmentinstructions 56/1 Data layout directives Data layout directives describe data in a more concise and natural manner than its binary representation. Example: .asciz "The sum from 0 .. 100 is %d\n" stores characters from the string in memory. Alternatively we can use the .byte directive to obtain the same effect. .byte 84, 104, 101, 32, 115, 117, 109, 32 .byte 102, 114, 111, 109, 32, 48, 32, 46 .byte 46, 32, 49, 48, 48, 32, 105, 115 .byte 32, 37, 100, 10, 0 The .asciz directive is easier to read for text strings. 57/1 Pseudo instructions You remember li reg imm? Turns out that li is not a RISC-V assembly command. RISC-V cannot load a 32 bit word in one instruction. Two instructions are needed (one for the lower 16 bits of imm, and another one for the upper 16 bits.) Instead it is a pseudo command: the assembler replaces each occurrency of li appropriately. The RARS simulator shows pseudo instructions and the instructions that the former translate to together. 58/1