程序代写代做代考 algorithm Java The LC-2 Instruction Set Architecture

The LC-2 Instruction Set Architecture

Chapter 6
Programming

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Solving Problems using a Computer
Methodologies for creating computer programs
that perform a desired function.

Problem Solving
How do we figure out what to tell the computer to do?
Convert problem statement into algorithm,
using stepwise refinement.
Convert algorithm into LC-3 machine instructions.

Debugging
How do we figure out why it didn’t work?
Examining registers and memory, setting breakpoints, etc.

Time spent on the first can reduce time spent on the second!

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Stepwise Refinement
Also known as systematic decomposition.

Start with problem statement:
“We wish to count the number of occurrences of a character
in a file. The character in question is to be input from
the keyboard; the result is to be displayed on the monitor.”

Decompose task into a few simpler subtasks.

Decompose each subtask into smaller subtasks,
and these into even smaller subtasks, etc….
until you get to the machine instruction level.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Problem Statement
Because problem statements are written in English,
they are sometimes ambiguous and/or incomplete.
Where is “file” located? How big is it, or how do I know
when I’ve reached the end?
How should final count be printed? A decimal number?
If the character is a letter, should I count both
upper-case and lower-case occurrences?

How do you resolve these issues?
Ask the person who wants the problem solved, or
Make a decision and document it.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Three Basic Constructs
There are three basic ways to decompose a task:

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Sequential
Do Subtask 1 to completion,
then do Subtask 2 to completion, etc.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Conditional
If condition is true, do Subtask 1;
else, do Subtask 2.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Iterative
Do Subtask over and over,
as long as the test condition is true.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Problem Solving Skills
Learn to convert problem statement
into step-by-step description of subtasks.

Like a puzzle, or a “word problem” from grammar school math.

What is the starting state of the system?
What is the desired ending state?
How do we move from one state to another?

Recognize English words that correlate to three basic constructs:

“do A then do B”  sequential
“if G, then do H”  conditional
“for each X, do Y”  iterative
“do Z until W”  iterative

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

LC-3 Control Instructions
How do we use LC-3 instructions to encode
the three basic constructs?

Sequential
Instructions naturally flow from one to the next,
so no special instruction needed to go
from one sequential subtask to the next.

Conditional and Iterative
Create code that converts condition into N, Z, or P.
Example:
Condition: “Is R0 = R1?”
Code: Subtract R1 from R0; if equal, Z bit will be set.
Then use BR instruction to transfer control to the proper subtask.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Code for Conditional

Exact bits depend
on condition
being tested
PC offset to
address C
PC offset to
address D
Unconditional branch
to Next Subtask
Assuming all addresses are close enough that PC-relative branch can be used.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Code for Iteration
Exact bits depend
on condition
being tested
PC offset to
address C
PC offset to
address A
Unconditional branch
to retest condition
Assuming all addresses are on the same page.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Example: Counting Characters
Initial refinement: Big task into
three sequential subtasks.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Refining B
Refining B into iterative construct.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Refining B1
Refining B1 into sequential subtasks.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Refining B2 and B3
Conditional (B2) and sequential (B3).
Use of LC-2 registers and instructions.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

The Last Step: LC-3 Instructions
Use comments to separate into modules and
to document your code.
; Look at each char in file.
0001100001111100 ; is R1 = EOT?
0000010xxxxxxxxx ; if so, exit loop
; Check for match with R0.
1001001001111111 ; R1 = -char
0001001001100001
0001001000000001 ; R1 = R0 – char
0000101xxxxxxxxx ; no match, skip incr
0001010010100001 ; R2 = R2 + 1
; Incr file ptr and get next char
0001011011100001 ; R3 = R3 + 1
0110001011000000 ; R1 = M[R3]
Don’t know
PCoffset bits until
all the code is done

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Debugging
You’ve written your program and it doesn’t work.
Now what?

What do you do when you’re lost in a city?
Drive around randomly and hope you find it?

Return to a known point and look at a map?

In debugging, the equivalent to looking at a map
is tracing your program.
Examine the sequence of instructions being executed.
Keep track of results being produced.
Compare result from each instruction to the expected result.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Debugging Operations
Any debugging environment should provide means to:
Display values in memory and registers.
Deposit values in memory and registers.
Execute instruction sequence in a program.
Stop execution when desired.

Different programming levels offer different tools.
High-level languages (C, Java, …)
usually have source-code debugging tools.
For debugging at the machine instruction level:

simulators
operating system “monitor” tools
in-circuit emulators (ICE)
plug-in hardware replacements that give
instruction-level control

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

LC-3 Simulator

set/display
registers
and memory

execute
instruction
sequences
stop execution,
set breakpoints

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Types of Errors
Syntax Errors
You made a typing error that resulted in an illegal operation.
Not usually an issue with machine language,
because almost any bit pattern corresponds to
some legal instruction.
In high-level languages, these are often caught during the
translation from language to machine code.

Logic Errors
Your program is legal, but wrong, so
the results don’t match the problem statement.
Trace the program to see what’s really happening and
determine how to get the proper behavior.

Data Errors
Input data is different than what you expected.
Test the program with a wide variety of inputs.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Tracing the Program
Execute the program one piece at a time,
examining register and memory to see results at each step.
Single-Stepping
Execute one instruction at a time.
Tedious, but useful to help you verify each step of your program.

Breakpoints
Tell the simulator to stop executing when it reaches
a specific instruction.
Check overall results at specific points in the program.

Lets you quickly execute sequences to get a
high-level overview of the execution behavior.
Quickly execute sequences that your believe are correct.
Watchpoints
Tell the simulator to stop when a register or memory location changes
or when it equals a specific value.
Useful when you don’t know where or when a value is changed.

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Example 1: Multiply
This program is supposed to multiply the two unsigned
integers in R4 and R5.
x3200 0101010010100000
x3201 0001010010000100
x3202 0001101101111111
x3203 0000011111111101
x3204 1111000000100101
Set R4 = 10, R5 =3.
Run program.
Result: R2 = 40, not 30.
clear R2
add R4 to R2
decrement R5
R5 = 0?
HALT

No
Yes

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Debugging the Multiply Program
PC and registers
at the beginning
of each instruction
Single-stepping
Breakpoint at branch (x3203)
Executing loop one time too many.
Branch at x3203 should be based
on Z bit only, not Z and P.
Should stop looping here!
PC R2 R4 R5
x3200 — 10 3
x3201 0 10 3
x3202 10 10 3
x3203 10 10 2
x3201 10 10 2
x3202 20 10 2
x3203 20 10 1
x3201 20 10 1
x3202 30 10 1
x3203 30 10 0
x3201 30 10 0
x3202 40 10 0
x3203 40 10 -1
x3204 40 10 -1
40 10 -1

PC R2 R4 R5
x3203 10 10 2
x3203 20 10 1
x3203 30 10 0
x3203 40 10 -1
40 10 -1

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Example 2: Summing an Array of Numbers
This program is supposed to sum the numbers
stored in 10 locations beginning with x3100,
leaving the result in R1.
R4 = 0?
HALT
No
Yes
R1 = 0
R4 = 10
R2 = x3100
R1 = R1 + M[R2]
R2 = R2 + 1
R4 = R4 – 1
x3000 0101001001100000
x3001 0101100100100000
x3002 0001100100101010
x3003 0010010011111100
x3004 0110011010000000
x3005 0001010010100001
x3006 0001001001000011
x3007 0001100100111111
x3008 0000001111111011
x3009 1111000000100101

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Debugging the Summing Program
Running the the data below yields R1 = x0024,
but the sum should be x8135. What happened?
Start single-stepping program…
Should be x3100!
Loading contents of M[x3100], not address.
Change opcode of x3003
from 0010 (LD) to 1110 (LEA).
Address Contents
x3100 x3107
x3101 x2819
x3102 x0110
x3103 x0310
x3104 x0110
x3105 x1110
x3106 x11B1
x3107 x0019
x3108 x0007
x3109 x0004

PC R1 R2 R4
x3000 — — —
x3001 0 — —
x3002 0 — 0
x3003 0 — 10
x3004 0 x3107 10

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Example 3: Looking for a 5
This program is supposed to set
R0=1 if there’s a 5 in one ten
memory locations, starting at x3100.
Else, it should set R0 to 0.
R2 = 5?
HALT
No
Yes
R0 = 1, R1 = -5, R3 = 10
R4 = x3100, R2 = M[R4]
R4 = R4 + 1
R3 = R3-1
R2 = M[R4]
x3000 0101000000100000
x3001 0001000000100001
x3002 0101001001100000
x3003 0001001001111011
x3004 0101011011100000
x3005 0001011011101010
x3006 0010100000001001
x3007 0110010100000000
x3008 0001010010000001
x3009 0000010000000101
x300A 0001100100100001
x300B 0001011011111111
x300C 0110010100000000
x300D 0000001111111010
x300E 0101000000100000
x300F 1111000000100101
x3010 0011000100000000
R3 = 0?
R0 = 0
Yes
No

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Debugging the Fives Program
Running the program with a 5 in location x3108
results in R0 = 0, not R0 = 1. What happened?
Perhaps we didn’t look at all the data?
Put a breakpoint at x300D to see
how many times we branch back.
Didn’t branch
back, even
though R3 > 0?
Branch uses condition code set by
loading R2 with M[R4], not by decrementing R3.
Swap x300B and x300C, or remove x300C and
branch back to x3007.
Address Contents
x3100 9
x3101 7
x3102 32
x3103 0
x3104 -8
x3105 19
x3106 6
x3107 13
x3108 5
x3109 61

PC R0 R2 R3 R4
x300D 1 7 9 x3101
x300D 1 32 8 x3102
x300D 1 0 7 x3103
0 0 7 x3103

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Example 4: Finding First 1 in a Word
This program is supposed to return (in R1) the bit position of the first 1 in a word. The address of the word is in location x3009 (just past the end of the program). If there
are no ones, R1 should be set to –1.
R1 = 15
R2 = data
R2[15] = 1?
decrement R1
shift R2 left one bit
HALT
x3000 0101001001100000
x3001 0001001001101111
x3002 1010010000000110
x3003 0000100000000100
x3004 0001001001111111
x3005 0001010010000010
x3006 0000100000000001
x3007 0000111111111100
x3008 1111000000100101
x3009 0011000100000000
R2[15] = 1?
Yes
Yes
No
No

ECE 206 – Fall 2001 – G. Byrd

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display.

Debugging the First-One Program
Program works most of the time, but if data is zero,
it never seems to HALT.
Breakpoint at backwards branch (x3007)
If no ones, then branch to HALT
never occurs!
This is called an “infinite loop.”
Must change algorithm to either
(a) check for special case (R2=0), or
(b) exit loop if R1 < 0. PC R1 x3007 14 x3007 13 x3007 12 x3007 11 x3007 10 x3007 9 x3007 8 x3007 7 x3007 6 x3007 5 PC R1 x3007 4 x3007 3 x3007 2 x3007 1 x3007 0 x3007 -1 x3007 -2 x3007 -3 x3007 -4 x3007 -5 ECE 206 - Fall 2001 - G. Byrd Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Debugging: Lessons Learned Trace program to see what’s going on. Breakpoints, single-stepping When tracing, make sure to notice what’s really happening, not what you think should happen. In summing program, it would be easy to not notice that address x3107 was loaded instead of x3100. Test your program using a variety of input data. In Examples 3 and 4, the program works for many data sets. Be sure to test extreme cases (all ones, no ones, ...). ECE 206 - Fall 2001 - G. Byrd Test character. If match, increment counter. Count = Count + 1 file char = input? True False Task Subtask 1 Subtask 2 Subtask 1 Subtask 2 Test condition Subtask Test condition Sequential Conditional Iterative True True False False Get character input from keyboard Examine file and count the number of characters that match Print number to the screen Count and print the occurrences of a character in a file Check each element of the file and count the characters that match. Check next char and count if matches. more chars to check? True False Generate Condition Instruction A 0000 B Subtask 1 C Subtask 2 Next Subtask D ? C 0000 111 D Subtask 1 Test Condition True False Subtask 2 Next Subtask Generate Condition Instruction A 0000 B Subtask C Next Subtask ? C 0000 111 A Subtask Test Condition True False Next Subtask Input a character. Then scan a file, counting occurrences of that character. Finally, display on the monitor the number of occurrences of the character (up to 9). START STOP Initialize: Put initial values into all locations that will be needed to carry out this task. - Input a character. - Set up a pointer to the first location of the file that will be scanned. - Get the first character from the file. - Zero the register that holds the count. START STOP Scan the file, location by location, incrementing the counter if the character matches. Display the count on the monitor. A B C Scan the file, location by location, incrementing the counter if the character matches. B Test character. If a match, increment counter. Get next character. B1 Done? No Yes B R1 = M[R3] Done? No Yes B2 B3 R3 = R3 + 1 R1 = R0? R2 = R2 + 1 No Yes Get next character. B1 Done? No Yes Test character. If matches, increment counter. B2 B3 Get next character. B1 Done? No Yes Test character. If matches, increment counter. B2 B3