程序代写代做代考 IOS ITE PC v4.0 Chapter 1

ITE PC v4.0 Chapter 1

Chapter 6: VLANs
Routing and Switching Essentials v6.0

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
1
Cisco Networking Academy Program
Routing and Switching Essentials v6.0
Chapter 6: VLANs

Chapter 6 – Sections & Objectives
6.1 VLAN Segmentation
Explain the purpose of VLANs in a switched network.
Explain how a switch forwards frames based on VLAN configuration in a multi-switch environment.
6.2 VLAN Implementations
Configure a switch port to be assigned to a VLAN based on requirements.
Configure a trunk port on a LAN switch.
Troubleshoot VLAN and trunk configurations in a switched network.
6.3 Inter-VLAN Routing Using Routers
Describe the two options for configuring Inter-VLAN routing.
Configure Legacy Inter-VLAN Routing.
Configure Router-on-a-Stick Inter-VLAN Routing

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
2

6.1 VLAN Segmentation

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
3
Cisco Networking Academy Program
Routing and Switching Essentials v6.0
Chapter 6: VLANs

Overview of VLANs
VLAN Definitions

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
4
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.1 – VLAN Definitions

Overview of VLANs
VLAN Definitions (cont.)
VLANs allow an administrator to segment networks based on factors such as function, project team, or application, without regard for the physical location of the user or device.
VLANs enable the implementation of access and security policies according to specific groupings of users.
A VLAN is a logical partition of a Layer 2 network.
Multiple partitions can be created, allowing for multiple VLANs to co-exist.
Each VLAN is a broadcast domain, usually with its own IP network.
VLANs are mutually isolated, and packets can only pass between them via a router.
The partitioning of the Layer 2 network takes place inside a Layer 2 device, usually via a switch.
The hosts grouped within a VLAN are unaware of the VLAN’s existence.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
5
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.1 – VLAN Definitions (cont.)

Overview of VLANs
Benefits of VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
6
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.2 – Benefits of VLANs

Overview of VLANs
Types of VLANs
Data VLAN – user generated traffic
Default VLAN – all switch ports become part of this VLAN until switch is configured, show vlan brief
Native VLAN – used for untagged traffic
Management VLAN – used to access management capabilities

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
7
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.3 – Types of VLANs

Overview of VLANs
Types of VLANs (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
8
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.3 – Types of VLANs (cont.)

Overview of VLANs
Voice VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
9
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.4 – Voice VLANs

Overview of VLANs
Voice VLANs (cont.)
VoIP traffic is time-sensitive and requires:
Assured bandwidth to ensure voice quality.
Transmission priority over other types of network traffic.
Ability to be routed around congested areas on the network.
Delay of less than 150 ms across the network.
The voice VLAN feature enables access ports to carry IP voice traffic from an IP phone.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
10
6.1 – VLAN Segmentation
6.1.1 – Overview of VLANs
6.1.1.4 – Voice VLANs (cont.)

VLANs in a Multi-Switched Environment
VLAN Trunks
The links between switches S1 and S2, and S1 and S3 are configured to transmit traffic coming from VLANs 10, 20, 30, and 99 across the network. This network could not function without VLAN trunks.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
11
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.1 – VLAN Trunks

VLANs in a Multi-Switched Environment
VLAN Trunks (cont.)
A VLAN trunk is a point-to-point link that carries more than one VLAN.
A VLAN trunk is usually established between switches so same-VLAN devices can communicate, even if physically connected to different switches.
A VLAN trunk is not associated to any VLANs; neither is the trunk ports used to establish the trunk link.
Cisco IOS supports IEEE802.1q, a popular VLAN trunk protocol.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
12
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.1 – VLAN Trunks (cont.)

VLANs in a Multi-Switched Environment
Controlling Broadcast Domains with VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
13
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.2 – Controlling Broadcast Domains with VLANs

VLANs in a Multi-Switched Environment
Controlling Broadcast Domains with VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
14
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.2 – Controlling Broadcast Domains with VLANs (cont.)

VLANs in a Multi-Switched Environment
Controlling Broadcast Domains with VLANs
VLANs can be used to limit the reach of broadcast frames.
A VLAN is a broadcast domain of its own.
A broadcast frame sent by a device in a specific VLAN is forwarded within that VLAN only.
VLANs help control the reach of broadcast frames and their impact in the network.
Unicast and multicast frames are forwarded within the originating VLAN.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
15
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.2 – Controlling Broadcast Domains with VLANs (cont.)

VLANs in a Multi-Switched Environment
Tagging Ethernet Frames for VLAN Identification
Frame tagging is the process of adding a VLAN identification header to the frame.
It is used to properly transmit multiple VLAN frames through a trunk link.
Switches tag frames to identify the VLAN to which they belong.
Different tagging protocols exist; IEEE 802.1Q is a vey popular example.
The protocol defines the structure of the tagging header added to the frame.
Switches add VLAN tags to the frames before placing them into trunk links and remove the tags before forwarding frames through non-trunk ports.
When properly tagged, the frames can transverse any number of switches via trunk links and still be forwarded within the correct VLAN at the destination.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
16
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.3 – Tagging Ethernet Frames for VLAN Identification

VLANs in a Multi-Switched Environment
Tagging Ethernet Frames for VLAN Identification (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
17
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.3 – Tagging Ethernet Frames for VLAN Identification (cont.)

VLANs in a Multi-Switched Environment
Native VLANs and 802.1Q Tagging
Control traffic sent on the native VLAN should not be tagged.
Frames received untagged, remain untagged and are placed in the native VLAN when forwarded.
If there are no ports associated to the native VLAN and no other trunk links, an untagged frame is dropped.
When configuring a switch port on a Cisco switch, configure devices so that they do not send tagged frames on the native VLAN.
In Cisco switches, the native VLAN is VLAN 1, by default.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
18
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.4 – Native VLANs and 802.1Q Tagging

VLANs in a Multi-Switched Environment
Voice VLAN Tagging

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
19
6.1 – VLAN Segmentation
6.1.2 – VLANs in a Multi-Switched Environment
6.1.2.5 – Voice VLAN Tagging

6.2 VLAN Implementations

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
20
Cisco Networking Academy Program
Routing and Switching Essentials v6.0
Chapter 6: VLANs

VLAN Assignment
VLAN Ranges on Catalyst Switches
Cisco Catalyst 2960 and 3560 Series switches support over 4,000 VLANs.
VLANs are split into two categories:
Normal range VLANs
VLAN numbers from 1 to 1,005
Configurations stored in the vlan.dat (in the flash memory)
IDs 1002 through 1005 are reserved for Token Ring and Fiber Distributed Data Interface (FDDI) VLANs, automatically created and cannot be removed
Extended Range VLANs
VLAN numbers from 1,006 to 4,096
Configurations stored in the running configuration (NVRAM)
VLAN Trunking Protocol (VTP) does not learn extended VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
21
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.1 – VLAN Ranges on Catalyst Switches

VLAN Assignment
VLAN Ranges on Catalyst Switches (cont.)
Normal Range VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
22
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.1 – VLAN Ranges on Catalyst Switches

VLAN Assignment
Creating a VLAN

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
23
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.2 – Creating a VLAN

VLAN Assignment
Assigning Ports to VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
24
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.3 – Assigning Ports to VLANs

VLAN Assignment
Assigning Ports to VLANs

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
25
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.3 – Assigning Ports to VLANs

VLAN Assignment
Changing VLAN Port Membership
Remove VLAN Assignment

Interface F0/18 was previously assigned to VLAN 20 which is still active, F0/18 reset to VLAN1

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
26
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.4 – Changing VLAN Port Membership

VLAN Assignment
Changing VLAN Port Membership (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
27
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.4 – Changing VLAN Port Membership (cont.)

VLAN Assignment
Changing VLAN Port Membership (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
28
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.4 – Changing VLAN Port Membership (cont.)

VLAN Assignment
Deleting VLANs
The entire vlan.dat file can be deleted using the delete flash:vlan.dat privileged EXEC mode command
Abbreviated command version (delete vlan.dat) can be used if the vlan.dat file has not been moved from its default location

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
29
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.5 – Deleting VLANs

VLAN Assignment
Verifying VLAN Information

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
30
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.6 – Verifying VLAN Information

VLAN Assignment
Verifying VLAN Information (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
31
6.2 – VLAN Implementations
6.2.1 – VLAN Assignment
6.2.1.6 – Verifying VLAN Information

VLAN Trunks
Configuring IEEE 802.1q Trunk Links

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
32
6.2 – VLAN Implementations
6.2.2 – VLAN Trunks
6.2.2.1 – Configuring IEEE 802.1q Trunk Links

VLAN Assignment
Configuring IEEE 802.1q Trunk Links (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
33
6.2 – VLAN Implementations
6.2.2 – VLAN Trunks
6.2.2.1 – Configuring IEEE 802.1q Trunk Links (cont.)

VLAN Trunks
Resetting the Trunk to Default State

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
34
6.2 – VLAN Implementations
6.2.2 – VLAN Trunks
6.2.2.2 – Resetting the Trunk to Default State

VLAN Trunks
Resetting the Trunk to Default State (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
35
6.2 – VLAN Implementations
6.2.2 – VLAN Trunks
6.2.2.2 – Resetting the Trunk to Default State (cont.)

VLAN Trunks
Verifying Trunk Configuration

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
36
6.2 – VLAN Implementations
6.2.2 – VLAN Trunk
6.2.2.3 – Verifying Trunk Configuration

Troubleshoot VLANs and Trunks
IP Addressing Issues with VLANs
It is a common practice to associate a VLAN with an IP network.
Because different IP networks only communicate through a router, all devices within a VLAN must be part of the same IP network to communicate.
The figure displays that PC1 cannot communicate to the server because it has a wrong IP address configured.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
37
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.1 – IP Addressing Issues with VLANs

Troubleshoot VLANs and Trunks
Missing VLANs
If all the IP address mismatches have been solved, but the device still cannot connect, check if the VLAN exists in the switch.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
38
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.2 – Missing VLANs

Troubleshoot VLANs and Trunks
Missing VLANs (cont.)
If the VLAN to which a port belongs is deleted, the port becomes inactive. All ports belonging to the VLAN that was deleted are unable to communicate with the rest of the network.
Not functional until the missing VLAN is created using the vlan vlan_id global configuration.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
39
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.2 – Missing VLANs (cont.)

Troubleshoot VLANs and Trunks
Introduction to Troubleshooting Trunks

Note: To solve a native VLAN mismatch, configure the native VLAN to be the same VLAN on both sides of the link.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
40
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.3 – Introduction to Troubleshooting Trunks

Troubleshoot VLANs and Trunks
Common Problems with Trunks
Trunking issues are usually associated with incorrect configurations.
The most common type of trunk configuration errors are:
Native VLAN mismatches
Trunk mode mismatches
Allowed VLANs on trunks
If a trunk problem is detected, the best practice guidelines recommend to troubleshoot in the order shown above.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
41
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.4 – Common Problems with Trunks

Troubleshoot VLANs and Trunks
Common Problems with Trunks (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
42
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.4 – Common Problems with Trunks

Troubleshoot VLANs and Trunks
Incorrect Port Mode

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
43
6.2 – VLAN Implementations
6.2.3 – Troubleshoot VLANs and Trunks
6.2.3.5 – Incorrect Port Mode

Troubleshoot VLANs and Trunks
Incorrect VLAN List

Troubleshoot VLANs and Trunks
Incorrect VLAN List (cont.)
VLANs must be allowed in the trunk before their frames can be transmitted across the link.
Use the switchport trunk allowed vlan command to specify which VLANs are allowed in a trunk link.
Use the show interfaces trunk command to ensure the correct VLANs are permitted in a trunk.

6.3 Inter-VLAN Routing Using Routers

Inter-VLAN Routing Operation
What is Inter-VLAN Routing?
Layer 2 switches cannot forward traffic between VLANs without the assistance of a router.
Inter-VLAN routing is a process for forwarding network traffic from one VLAN to another, using a router.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
47
6.3 – Inter-VLAN Routing Using Routers
6.3.1 – Inter-VLAN Routing Operation
6.3.1.1 – What is Inter-VLAN Routing?

Inter-VLAN Routing Operation
Legacy Inter-VLAN Routing
In the past:
Actual routers were used to route between VLANs.
Each VLAN was connected to a different physical router interface.
Packets would arrive on the router through one interface, be routed and leave through another.
Because the router interfaces were connected to VLANs and had IP addresses from that specific VLAN, routing between VLANs was achieved.
Large networks with large number of VLANs required many router interfaces.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
48
6.3 – Inter-VLAN Routing Using Routers
6.3.1 – Inter-VLAN Routing Operation
6.3.1.2 – Legacy Inter-VLAN Routing

Inter-VLAN Routing Operation
Legacy Inter-VLAN Routing (cont.)

In this example, the router was configured with two separate physical interfaces to interact with the different VLANs and perform the routing.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
49
6.3 – Inter-VLAN Routing Using Routers
6.3.1 – Inter-VLAN Routing Operation
6.3.1.2 – Legacy Inter-VLAN Routing (cont.)

Inter-VLAN Routing Operation
Router-on-a-Stick Inter-VLAN Routing
The router-on-a-stick approach uses only one of the router’s physical interface.
One of the router’s physical interfaces is configured as a 802.1Q trunk port so it can understand VLAN tags.
Logical subinterfaces are created; one subinterface per VLAN.
Each subinterface is configured with an IP address from the VLAN it represents.
VLAN members (hosts) are configured to use the subinterface address as a default gateway.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
50
6.3 – Inter-VLAN Routing Using Routers
6.3.1 – Inter-VLAN Routing Operation
6.3.1.3 – Router-on-a-Stick Inter-VLAN Routing

Inter-VLAN Routing Operation
Router-on-a-Stick Inter-VLAN Routing (cont.)

Router interface configured to operate as a trunk link and is connected to a trunked switch port. The router performs inter-VLAN routing by accepting VLAN-tagged traffic on the trunk interface coming from the adjacent switch, and then, internally routing between the VLANs using subinterfaces. The router then forwards the routed traffic, VLAN-tagged for the destination VLAN, out the same physical interface as it used to receive the traffic.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
51
6.3 – Inter-VLAN Routing Using Routers
6.3.1 – Inter-VLAN Routing Operation
6.3.1.3 – Router-on-a-Stick Inter-VLAN Routing (cont.)

Configure Legacy Inter-VLAN Routing
Configure Legacy Inter-VLAN Routing: Preparation
Legacy inter-VLAN routing requires routers to have multiple physical interfaces.
Each one of the router’s physical interfaces is connected to a unique VLAN.
Each interface is also configured with an IP address for the subnet associated with the particular VLAN.
Network devices use the router as a gateway to access the devices connected to the other VLANs.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
52
6.3 – Inter-VLAN Routing Using Routers
6.3.2 – Configure Legacy Inter-VLAN Routing
6.3.2.1 – Configure Legacy Inter-VLAN Routing: Preparation

Configure Legacy Inter-VLAN Routing
Configure Legacy Inter-VLAN Routing: Switch Configuration

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
53
6.3 – Inter-VLAN Routing Using Routers
6.3.2 – Configure Legacy Inter-VLAN Routing
6.3.2.2 – Configure Legacy Inter-VLAN Routing: Switch Configuration

Configure Legacy Inter-VLAN Routing
Configure Legacy Inter-VLAN Routing: Router Interface Configuration

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
54
6.3 – Inter-VLAN Routing Using Routers
6.3.2 – Configure Legacy Inter-VLAN Routing
6.3.2.3 – Configure Legacy Inter-VLAN Routing: Router Interface Configuration

Configure Router-on-a-Stick Inter-VLAN Routing
Configure Router-on-a Stick: Preparation
An alternative to legacy inter-VLAN routing is to use VLAN trunking and subinterfaces.
VLAN trunking allows a single physical router interface to route traffic for multiple VLANs.
The physical interface of the router must be connected to a trunk link on the adjacent switch.
On the router, subinterfaces are created for each unique VLAN.
Each subinterface is assigned an IP address specific to its subnet or VLAN and is also configured to tag frames for that VLAN.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
55
6.3 – Inter-VLAN Routing Using Routers
6.3.3 – Configure Router-on-a-Stick Inter-VLAN Routing
6.3.3.1 – Configure Router-on-a Stick: Preparation

Configure Router-on-a-Stick Inter-VLAN Routing
Configure Router-on-a Stick: Switch Configuration

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
56
6.3 – Inter-VLAN Routing Using Routers
6.3.3 – Configure Router-on-a-Stick Inter-VLAN Routing
6.3.3.2 – Configure Router-on-a Stick: Switch Configuration

Configure Router-on-a-Stick Inter-VLAN Routing
Configure Router-on-a Stick: Router Subinterface Configuration

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
57
6.3 – Inter-VLAN Routing Using Routers
6.3.3 – Configure Router-on-a-Stick Inter-VLAN Routing
6.3.3.3 – Configure Router-on-a Stick: Router Subinterface Configuration

Configure Router-on-a-Stick Inter-VLAN Routing
Configure Router-on-a Stick: Verifying Subinterfaces

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
58
6.3 – Inter-VLAN Routing Using Routers
6.3.3 – Configure Router-on-a-Stick Inter-VLAN Routing
6.3.3.4 – Configure Router-on-a Stick: Verifying Subinterfaces

Configure Router-on-a-Stick Inter-VLAN Routing
Configure Router-on-a Stick: Verifying Subinterfaces (cont.)

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
59
6.3 – Inter-VLAN Routing Using Routers
6.3.2 – Configure Router-on-a-Stick Inter-VLAN Routing
6.3.3.4 – Configure Router-on-a Stick: Verifying Subinterfaces (cont.)

Configure Router-on-a-Stick Inter-VLAN Routing
Configure Router-on-a Stick: Verifying Routing
Access to devices on remote VLANs can be tested using the ping command.
The ping command sends an ICMP echo request to the destination address.
When a host receives an ICMP echo request, it responds with an ICMP echo reply.
Tracert is a useful utility for confirming the routed path taken between two devices.

Presentation_ID
‹#›
© 2008 Cisco Systems, Inc. All rights reserved.
Cisco Confidential
60
6.3 – Inter-VLAN Routing Using Routers
6.3.3 – Configure Router-on-a-Stick Inter-VLAN Routing
6.3.3.5 – Configure Router-on-a Stick: Verifying Routing

6.4 Chapter Summary

Explain the purpose of VLANs in a switched network.
Explain how a switch forwards frames based on VLAN configuration in a multi-switch environment.
Configure a switch port to be assigned to a VLAN based on requirements.
Configure a trunk port on a LAN switch.
Troubleshoot VLAN and trunk configurations in a switched network.
Describe the two options for configuring inter-VLAN routing.
Configure Legacy Inter-VLAN Routing.
Configure Router-on-a-Stick Inter-VLAN Routing
Chapter Summary
Summary

/docProps/thumbnail.jpeg

Related Posts