EC 441 Assignment #3: Intra-Domain Routing
Due: Thursday, April 8, 2021
The Internet is composed of many independent networks (called autonomous systems) that must cooperate in order for packets to reach their destinations. This necessitates different protocols and algorithms for routing packet within autonomous systems, where all routers are operated by the same entity, and between autonomous systems, where business agreements and other policy considerations affect routing decisions.
This assignment focuses on intra-domain routing algorithms used by routers within a single autonomous system (AS). The goal of intra-domain routing is typically to forward packets along the shortest or lowest cost path through the network.
The need to rapidly handle unexpected router or link failures, changing link costs (usually depending on traffic volume), and connections from new routers and clients, motivates the use of distributed algorithms for intra-domain routing. In these distributed algorithms, routers start with only their local state and must communicate with each other to learn lowest cost paths.
Nearly all intra-domain routing algorithms used in real-world networks fall into one of two categories, distance-vector or link-state. In this assignment, you will implement distributed distance-vector and link-state routing algorithms in Python and test them with a provided network simulator.
This assignment can be done individually or in groups of 2 students. You are only required to implement either distance-vector or link-state. If you implement both, you can get a bonus of two points. This bonus can be used towards the final grade.
Background
Begin by reading the slides of Routing Fundamentals and Routing Algorithms. They provide enough information to design both the distance-vector and link-state routing algorithms. At a high level, they work as follows. Your goal in this assignment is to turn this high-level description into working code.
Distance-Vector Routing
– Each router keeps its own distance vector, which contains its distance to all destinations.
– When a router receives a distance vector from a neighbor, it updates its own distance vector and the forwarding table.
– Each router broadcasts its own distance vector to all neighbors when the distance vector changes. The broadcast is also done periodically if no detected change has occurred.
1
– Each router does not broadcast the received distance vector to its neighbors. It only broadcasts its own distance vector to its neighbors.
Link-State Routing
– Each router keeps its own link state and other nodes’ link states it receives. The link state of a router contains the links and their weights between the router and its neighbors.
– When a router receives a link state from its neighbor, it updates the stored link state and the forwarding table. Then it broadcasts the link state to other neighbors.
– Each router broadcast its own link state to all neighbors when the link state changes. The broadcast is also done periodically if no detected change has occurred.
– A sequence number is added to each link state message to distinguish between old and new link state messages. Each router stores the sequence number together with the link state. If a router receives a link state message with a smaller sequence number (i.e., an old link state message), the link state message is simple disregarded.
Provided code
Assignment folder
Copy the ¡°assignment3¡± folder to your course assignment directory and cd to it.
Run `vagrant reload –provision` to install the needed libraries for this assignment and start the VM (no need to run `vagrant up` in addition).
Then run vagrant ssh and cd /vagrant to enter the virtual machine just as you did in Assignment 1. The provided code should be located in the /vagrant/assignment3 of your vagrant VM.
Familiarize yourself with the network simulator
The provided code implements a network simulator that abstracts away many details of a real network, allowing you to focus on intra-domain routing algorithms. Each .json file in the ¡°assignment3¡± directory is the specification for a different network simulation with different numbers of routers, links, and link costs. Some of these simulations also contain link additions and/or failures that will occur at pre-specified times.
The network simulator can be run with or without a graphical interface. For example, the command python visualize_network.py 01_small_net.json will run the simulator on a simple network with 2 routers and 3 clients. The default router implementation returns all traffic back out the link on which it arrives. This is obviously a terrible routing algorithm, which your implementations will fix.
2
The network architecture is shown on the left side of the visualization. Routers are colored red, clients are colored blue. Each client periodically sends gray traceroute-like packets addressed to every other client in the network. These packets remember the sequence of routers they traverse, and the most recent route taken to each client is printed in the text box on the top right. This is an important debugging tool.
The cost of each link is printed on the connections.
Clicking on a client hides all packets except those addressed to that client, so you can see the path chosen by the routers. Clicking on the client again will go back to showing all packets.
Clicking on a router causes a string about that router to print in the text box on the lower right. You will be able to set the contents of this string for debugging your router implementations.
The same network simulation can be run without the graphical interface by the command python network.py 01_small_net.json. The simulation will run faster without having to go at visualizable speed. It will stop after a predetermined amount of time, print the final routes taken by the traceroute packets to and from all clients and whether these routes are correct given the known lowest-cost paths through the network.
Implementation instructions
Your job is to complete the DVrouter or LSrouter classes in the DVrouter.py and LSrouter.py files so they implement distance-vector or link-state routing algorithms, respectively.
The simulator will run independent instances of your completed DVrouter or LSrouter classes in separate threads, simulating independent routers in a network.
You will notice that the marked with TODO (including in the superclass (in event occurs (e.g.,
and classes contain several unfinished methods
, , etc.). These methods override those
) and are called by the simulator when a corresponding will be called when a router instance receives a packet).
DVrouter
handlePacket
LSrouter
debugString
Router
router.py
handlePacket()
The arguments to these methods contain all the information you need to implement the routing algorithms. Each of these methods is described in greater detail below.
In addition to completing each of these methods, you are free to add additional fields (instance variables) or helper methods to the DVrouter and LSrouter classes.
You will be graded on whether your solutions find lowest cost paths in the face of link failures and additions. Here are a few further simplifications:
3
– Each client and router in the network simulation has a single static address. Do not worry about address prefixes, families, or masks.
– You do not need to worry about packet authentication and checksums. Assume that a lower layer protocol handles corruption checking.
– As long your routers behave correctly when notified of link additions and failures, you do not need to worry about time-to-live (TTL) fields. The network simulations are short and routers/links will not fail silently.
– The slides discuss the ¡°count-to-infinity¡± problem for distance-vector routing. You will need to handle this problem. You can use the heuristic discussed in the slides. Setting infinity = 16 is fine for the networks in this assignment.
– Link-state routing involves reliably flooding link state updates. You will need to use sequence numbers to distinguish new updates from old updates, but you will not need to check (via acknowledgements and retransmissions) that LSPs send successfully between adjacent routers. Assume that a lower-level protocol makes single-hop sends reliable.
– Link-state routing involves computing shortest paths. You can choose to implement Dijkstra’s algorithm, and the pseudo code is in the slides. Since this is a networking class instead of a data structures and algorithms class, you can also use a Python package like NetworkX. We have pre-installed the NetworkX package in the VM. You need to run vagrant reload –provision if you haven’t done this already for this assignment.
– Finally, LS and DV routing involve periodically sending routing information even if no detected change has occurred. This allows changes occurring far away in the network to propagate even if some routers do not change their routing tables in response to these changes (important for this assignment). It also allows detection of silent router failures (not tested in this assignment). Your implementations should send periodic routing packets every milliseconds where heartbeatTime is an argument to the DVrouter or constructor. You will regularly get the current time in milliseconds as an argument to the handleTime method (see below).
Restrictions
There are limitations on what information your DVrouter and LSrouter classes are allowed to access from the other provided Python files. Unlike C and Java, Python does not support private variables and classes. Instead, the list of limitations here will be checked when grading. Violating any of these requirements will result in serious grade penalties.
heartbeatTime
LSrouter
4
– Your solution must not require modification to any files other than DVrouter.py and LSrouter.py. The grading tests will be performed with unchanged versions of the other files.
– Your code may not call any functions or methods, instantiate any classes, or access any variables defined in any of the other provided python files, with the following exceptions:
o o o
LSrouter and can call the inherited send function of the Router
Method descriptions
DVrouter
superclass (e.g.,
and can access the
) to get their own address. and can create new
).
field of the Router superclass (e.g., objects and call any of the
self.send(port, packet)
LSrouter
self.addr
LSrouter
DVrouter
DVrouter
methods defined in EXCEPT for
. You can access and change any of the fields of a
EXCEPT for .
,
These are the methods you need to complete in DVrouter and LSrouter:
, and object
packet.py
–
o Class constructor. is the address of this router. Add your own class fields
and initialization code (e.g., to create forwarding table data structures). Routing information should be sent by this router at least once every heartbeatTime milliseconds.
– handlePacket(self, port, packet)
o Process incoming packet: This method is called whenever a packet arrives at the
router on port number port. You should check whether the packet is a traceroute packet or a routing packet and handle it appropriately. Methods and fields of the packet class are defined in packet.py.
– handleNewLink(self, port, endpoint, cost)
o This method is called whenever a new link is added to the router on port number
port connecting to a router or client with address endpoint and link cost cost. You should store the argument values in a data structure to use for routing. If you want to send packets along this link, call self.send(port, packet).
– handleRemoveLink(self, port)
o Thismethodiscalledwhentheexistinglinkonportnumberportisdisconnected.
You should update data structures appropriately.
– handleTime(self, timeMillisecs)
o This method is called regularly and provides you with the current time in milliseconds for sending routing packets at regular intervals.
– debugString(self)
5
addr
Packet
getRoute()
addToRoute()
animateSend()
Packet
route
__init__(self, addr, heartbeatTime)
addr
o This method is called by the network visualization to print current details about the router. It should return any string that will be helpful for debugging. This method is for your own use and will not be graded.
Creating and sending packets
You will need to create packets to send information between routers using the Packet class defined in packet.py. Any packet p you create to send routing information should have p.kind == ROUTING.
You will have to decide what to include in the content field of these packets. The content should be reasonable for the algorithm you are implementing (e.g., don’t send an entire routing table for link-state routing).
Packet content must be a string. This is checked by an assert statement when the packet is sent. DVrouter and LSrouter import the dumps() and loads() functions which return a string (in json format) when given a python object. Using these functions is an easy way to stringify and de- stringify.
You can access and set/modify any of the fields of a packet object (including content, srcAddr, dstAdddr and kind) except for route (see ¡°Restrictions¡± above).
Link reliability
If a link between two routers fails or is added, the appropriate handle function will always be called on both routers after the failure or addition.
Links have varying latencies (usually proportional to their costs). Packets may not arrive in the global order that they are sent.
Ceci n’est pas un network…
The simulated network in this assignment abstracts away many details you would need to consider when implementing distance-vector or link-state algorithms on real routers. This should allow you to focus on the core ideas of the algorithms without worrying about other protocols (e.g., ARP) or meticulous systems programming issues. If you are curious about these real-world details, please ask on Piazza or in office hours.
6
Running and Testing
You should test your DVrouter and LSrouter using the provided network simulator. There are multiple json files defining different network architectures and link failures and additions. ¡°05_pg242_net.json¡± and ¡°03_pg244_net.json¡± files define the networks on pages 242 and 244 of the textbook reading respectively. The json files without ¡°events¡± in their file name do not have link failures or additions and are good for initial testing.
Run the simulation with the graphical interface using the command
python visualize_network.py [networkSimulationFile.json] [DV|LS]
The argument DV or LS indicates whether to run DVrouter or LSrouter, respectively. Run the simulation without the graphical interface with the command
python network.py [networkSimulationFile.json] [DV|LS]
The routes to and from each client at the end of the simulation will print, along with whether they match the reference lowest-cost routes. If the routes match, your implementation has passed for that simulation. If they do not, continue debugging (using print statements and the debugString() method in your router classes).
The tesing script test_dv_ls.sh will run all the supplied networks with your router implementations. You may need to run first to make the script executable. You can also pass ¡°LS¡± or ¡°DV¡± as an argument to (e.g., test_dv_ls.sh DV) to test only one implementation.
Don’t worry if you get the following error. It sometimes occurs when the threads are stopped at the end of the simulation without warning:
Submission
You must submit to Blackboard:
o The source code for or .
o Bonus: If you submit both and and they pass all the tests, you
can get a bonus of 2 points, in addition to the 10 points of this assignment.
chmod 744 test_dv_ls.sh
test_dv_ls.sh
Unhandled exception in thread started by
sys.excepthook is missing
lost sys.stderr
DVrouter.py
LSrouter.py
DVrouter.py
7
LSrouter.py
We will run the network simulation using the provided json files. Your grade will be based on whether your algorithm finds the lowest cost paths and whether you have violated any of the restrictions listed above. We will also check that DVrouter actually runs a distance-vector algorithm and that LSrouter actually runs a link-state algorithm.
As always, start early and feel free to ask questions on Piazza and in office hours.
8