Figure 9.01
Silberschatz, Galvin and Gagne ©2009
Operating System Concepts – 8th Edition,
Main Memory
*
Memory Management
Background
Swapping
Contiguous Memory Allocation
Paging
Structure of the Page Table
Segmentation
Example: The Intel Pentium
*
Objectives
To provide a detailed description of various ways of organizing memory hardware
To discuss various memory-management techniques, including paging and segmentation
To provide a detailed description of the Intel Pentium, which supports both pure segmentation and segmentation with paging
*
Background
Program must be brought (from disk) into memory and placed within a process for it to be run
Main memory and registers are only storage CPU can access directly
Register access in one CPU clock (or less)
Main memory can take many cycles
Cache sits between main memory and CPU registers
Protection of memory required to ensure correct operation
*
Base and Limit Registers
A pair of base and limit registers define the logical address space
*
Binding of Instructions and Data to Memory
Address binding of instructions and data to memory addresses can happen at three different stages
Compile time: If memory location known a priori, absolute code can be generated; must recompile code if starting location changes
Load time: Must generate relocatable code if memory location is not known at compile time
Execution time: Binding delayed until run time if the process can be moved during its execution from one memory segment to another. Need hardware support for address maps (e.g., base and limit registers)
*
Multistep Processing of a User Program
*
Logical vs. Physical Address Space
The concept of a logical address space that is bound to a separate physical address space is central to proper memory management
Logical address – generated by the CPU; also referred to as virtual address
Physical address – address seen by the memory unit
Logical and physical addresses are the same in compile-time and load-time address-binding schemes; logical (virtual) and physical addresses differ in execution-time address-binding scheme
*
Memory-Management Unit (MMU)
Hardware device that maps virtual to physical address
In MMU scheme, the value in the relocation register is added to every address generated by a user process at the time it is sent to memory
The user program deals with logical addresses; it never sees the real physical addresses
*
Dynamic relocation using a relocation register
*
Dynamic Loading
Routine is not loaded until it is called
Better memory-space utilization; unused routine is never loaded
Useful when large amounts of code are needed to handle infrequently occurring cases
No special support from the operating system is required implemented through program design
*
Dynamic Linking
Linking postponed until execution time
Small piece of code, stub, used to locate the appropriate memory-resident library routine
Stub replaces itself with the address of the routine, and executes the routine
Operating system needed to check if routine is in processes’ memory address
Dynamic linking is particularly useful for libraries
System also known as shared libraries
*
Swapping
A process can be swapped temporarily out of memory to a backing store, and then brought back into memory for continued execution
Backing store – fast disk large enough to accommodate copies of all memory images for all users; must provide direct access to these memory images
Roll out, roll in – swapping variant used for priority-based scheduling algorithms; lower-priority process is swapped out so higher-priority process can be loaded and executed
Major part of swap time is transfer time; total transfer time is directly proportional to the amount of memory swapped
Modified versions of swapping are found on many systems (i.e., UNIX, Linux, and Windows)
System maintains a ready queue of ready-to-run processes which have memory images on disk
*
Schematic View of Swapping
*
Contiguous Allocation
Main memory usually into two partitions:
Resident operating system, usually held in low memory with interrupt vector
User processes then held in high memory
Relocation registers used to protect user processes from each other, and from changing operating-system code and data
Base register contains value of smallest physical address
Limit register contains range of logical addresses – each logical address must be less than the limit register
MMU maps logical address dynamically
*
Hardware Support for Relocation and Limit Registers
*
Contiguous Allocation (Cont)
Multiple-partition allocation
Hole – block of available memory; holes of various size are scattered throughout memory
When a process arrives, it is allocated memory from a hole large enough to accommodate it
Operating system maintains information about:
a) allocated partitions b) free partitions (hole)
OS
process 5
process 8
process 2
OS
process 5
process 2
OS
process 5
process 2
OS
process 5
process 9
process 2
process 9
process 10
*
Dynamic Storage-Allocation Problem
First-fit: Allocate the first hole that is big enough
Best-fit: Allocate the smallest hole that is big enough; must search entire list, unless ordered by size
Produces the smallest leftover hole
Worst-fit: Allocate the largest hole; must also search entire list
Produces the largest leftover hole
How to satisfy a request of size n from a list of free holes
First-fit and best-fit better than worst-fit in terms of speed and storage utilization
*
Fragmentation
External Fragmentation – total memory space exists to satisfy a request, but it is not contiguous
Internal Fragmentation – allocated memory may be slightly larger than requested memory; this size difference is memory internal to a partition, but not being used
Reduce external fragmentation by compaction
Shuffle memory contents to place all free memory together in one large block
Compaction is possible only if relocation is dynamic, and is done at execution time
I/O problem
Latch job in memory while it is involved in I/O
Do I/O only into OS buffers
*
Paging
Logical address space of a process can be noncontiguous; process is allocated physical memory whenever the latter is available
Divide physical memory into fixed-sized blocks called frames (size is power of 2, between 512 bytes and 8,192 bytes)
Divide logical memory into blocks of same size called pages
Keep track of all free frames
To run a program of size n pages, need to find n free frames and load program
Set up a page table to translate logical to physical addresses
Internal fragmentation
*
Address Translation Scheme
Address generated by CPU is divided into:
Page number (p) – used as an index into a page table which contains base address of each page in physical memory
Page offset (d) – combined with base address to define the physical memory address that is sent to the memory unit
For given logical address space 2m and page size 2n
page number
page offset
p
d
m – n
n
*
Paging Hardware
*
Paging Model of Logical and Physical Memory
*
Paging Example
32-byte memory and 4-byte pages
*
Free Frames
Before allocation
After allocation
*
Implementation of Page Table
Page table is kept in main memory
Page-table base register (PTBR) points to the page table
Page-table length register (PRLR) indicates size of the page table
In this scheme every data/instruction access requires two memory accesses. One for the page table and one for the data/instruction.
The two memory access problem can be solved by the use of a special fast-lookup hardware cache called associative memory or translation look-aside buffers (TLBs)
Some TLBs store address-space identifiers (ASIDs) in each TLB entry – uniquely identifies each process to provide address-space protection for that process
*
Associative Memory
Associative memory – parallel search
Address translation (p, d)
If p is in associative register, get frame # out
Otherwise get frame # from page table in memory
Page #
Frame #
*
Paging Hardware With TLB
*
Effective Access Time
Associative Lookup = time unit
Assume memory cycle time is 1 μs
Hit ratio – percentage of times that a page number is found in the associative registers; ratio related to number of associative registers
Hit ratio =
Effective Access Time (EAT)
EAT = (1 + ) + (2 + )(1 – )
= 2 + –
*
Memory Protection
Memory protection implemented by associating protection bit with each frame
Valid-invalid bit attached to each entry in the page table:
“valid” indicates that the associated page is in the process’ logical address space, and is thus a legal page
“invalid” indicates that the page is not in the process’ logical address space
*
Valid (v) or Invalid (i) Bit In A Page Table
*
Shared Pages
Shared code
One copy of read-only (reentrant) code shared among processes (i.e., text editors, compilers, window systems).
Shared code must appear in same location in the logical address space of all processes
Private code and data
Each process keeps a separate copy of the code and data
The pages for the private code and data can appear anywhere in the logical address space
*
Shared Pages Example
*
Structure of the Page Table
Hierarchical Paging
Hashed Page Tables
Inverted Page Tables
*
Hierarchical Page Tables
Break up the logical address space into multiple page tables
A simple technique is a two-level page table
*
Two-Level Page-Table Scheme
*
Two-Level Paging Example
A logical address (on 32-bit machine with 1K page size) is divided into:
a page number consisting of 22 bits
a page offset consisting of 10 bits
Since the page table is paged, the page number is further divided into:
a 12-bit page number
a 10-bit page offset
Thus, a logical address is as follows:
where pi is an index into the outer page table, and p2 is the displacement within the page of the outer page table
page number
page offset
pi
p2
d
12
10
10
*
Address-Translation Scheme
*
Three-level Paging Scheme
*
Hashed Page Tables
Common in address spaces > 32 bits
The virtual page number is hashed into a page table
This page table contains a chain of elements hashing to the same location
Virtual page numbers are compared in this chain searching for a match
If a match is found, the corresponding physical frame is extracted
*
Hashed Page Table
*
Inverted Page Table
One entry for each real page of memory
Entry consists of the virtual address of the page stored in that real memory location, with information about the process that owns that page
Decreases memory needed to store each page table, but increases time needed to search the table when a page reference occurs
Use hash table to limit the search to one — or at most a few — page-table entries
*
Inverted Page Table Architecture
Size(page_table) = # pages in main memory
*
Segmentation
Memory-management scheme that supports user view of memory
A program is a collection of segments
A segment is a logical unit such as:
main program
procedure
function
method
object
local variables, global variables
common block
stack
symbol table
arrays
*
User’s View of a Program
*
Logical View of Segmentation
1
3
2
4
user space
physical memory space
1
4
2
3
*
Segmentation Architecture
Logical address consists of a two tuple:
Segment table – maps two-dimensional physical addresses; each table entry has:
base – contains the starting physical address where the segments reside in memory
limit – specifies the length of the segment
Segment-table base register (STBR) points to the segment table’s location in memory
Segment-table length register (STLR) indicates number of segments used by a program;
segment number s is legal if s < STLR * Segmentation Architecture (Cont.) Protection With each entry in segment table associate: validation bit = 0 illegal segment read/write/execute privileges Protection bits associated with segments; code sharing occurs at segment level Since segments vary in length, memory allocation is a dynamic storage-allocation problem A segmentation example is shown in the following diagram * Segmentation Hardware * Example of Segmentation * Example: The Intel Pentium Supports both segmentation and segmentation with paging CPU generates logical address Given to segmentation unit Which produces linear addresses Linear address given to paging unit Which generates physical address in main memory Paging units form equivalent of MMU * Logical to Physical Address Translation in Pentium * Intel Pentium Segmentation * Pentium Paging Architecture * Linear Address in Linux Broken into four parts: * Three-level Paging in Linux * Silberschatz, Galvin and Gagne ©2009 Operating System Concepts – 8th Edition, End of Chapter 8 *