CS计算机代考程序代写 dns cache FTP Project 3: HTTP Wireshark (100 Pts) Due: 23:59 Friday, November 20, 2020

Project 3: HTTP Wireshark (100 Pts) Due: 23:59 Friday, November 20, 2020
CSE422 Computer Networks Fall 2020
Introduction
One’s understanding of network protocols can often be greatly deepened by “seeing protocols in action” and by “playing around with protocols” – observing the sequence of messages exchanged between two protocol entities, delving down into the details of protocol operation, and causing protocols to perform certain actions and then observing these actions and their consequences. This can be done in simulated scenarios or in a “real” network environment such as the Internet. In the Wireshark labs you’ll be doing in this course, you’ll be running various network applications in different scenarios using your own computer (or you can borrow a friends; let me know if you don’t have access to a computer where you can install/run Wireshark). You’ll observe the network protocols in your computer “in action,” interacting and exchanging messages with protocol entities executing elsewhere in the Internet. Thus, you and your computer will be an integral part of these “live” labs. You’ll observe, and you’ll learn, by doing.
1 Getting Started
In this first Wireshark lab, you’ll get acquainted with Wireshark, and make some simple packet captures and observations.
The basic tool for observing the messages exchanged between executing protocol entities is called a packet sniffer. As the name suggests, a packet sniffer captures (“sniffs”) messages being sent/received from/by your computer; it will also typically store and/or display the contents of the various protocol fields in these captured messages. A packet sniffer itself is passive. It ob- serves messages being sent and received by applications and protocols running on your computer, but never sends packets itself. Similarly, received packets are never explicitly addressed to the packet sniffer. Instead, a packet sniffer receives a copy of packets that are sent/received from/by application and protocols executing on your machine.
Figure 1 shows the structure of a packet sniffer. At the right of Figure 1 are the protocols (in this case, Internet protocols) and applications (such as a web browser or FTP client) that normally run on your computer. The packet sniffer, shown within the dashed rectangle in Figure 1 is an addition to the usual software in your computer, and consists of two parts. The packet capture library receives a copy of every link-layer frame that is sent from or received by your computer. Recall from the discussion from section 1.5 in the text (Figure 1.24) that messages exchanged by higher layer protocols such as HTTP, FTP, TCP, UDP, DNS, or IP all are eventually encapsulated in link- layer frames that are transmitted over physical media such as an Ethernet cable. In Figure 1, the assumed physical media is an Ethernet, and so all upper-layer protocols are eventually encapsulated
1

within an Ethernet frame. Capturing all link-layer frames thus gives you all messages sent/received from/by all protocols and applications executing in your computer.
Figure 1: Packet Sniffer Structure
The second component of a packet sniffer is the packet analyzer, which displays the contents of all fields within a protocol message. In order to do so, the packet analyzer must “understand” the structure of all messages exchanged by protocols. For example, suppose we are interested in displaying the various fields in messages exchanged by the HTTP protocol in Figure 1. The packet analyzer understands the format of Ethernet frames, and so can identify the IP datagram within an Ethernet frame. It also understands the IP datagram format, so that it can extract the TCP segment within the IP datagram. Finally, it understands the TCP segment structure, so it can extract the HTTP message contained in the TCP segment. Finally, it understands the HTTP protocol and so, for example, knows that the first bytes of an HTTP message will contain the string “GET,” “POST,” or “HEAD,” as shown in Figure 2.8 in the text.
We will be using the Wireshark packet sniffer [http://www.wireshark.org/] for these labs, allowing us to display the contents of messages being sent/received from/by protocols at different levels of the protocol stack. (Technically speaking, Wireshark is a packet analyzer that uses a packet capture library in your computer). Wireshark is a free network protocol analyzer that runs on Windows, Linux/Unix, and Mac computers. It’s an ideal packet analyzer for our labs – it is stable, has a large user base and well-documented support that includes a user-guide, man pages, a detailed FAQ, rich functionality that includes the capability to analyze hundreds of protocols, and a well-designed user interface. It operates in computers using Ethernet, serial (PPP and SLIP), 802.11 wireless LANs, and many other link-layer technologies (if the OS on which it’s running allows Wireshark to do so).
1.1 Installing wireshark
In order to run Wireshark, you will need to have access to a computer that supports both Wireshark and the libpcap or WinPCap packet capture library. The libpcap software will be installed for you,
2

if it is not installed within your operating system, when you install Wireshark. See here for a list of supported operating systems and download sites.
Download and install the Wireshark software:
• Go here and download and install the Wireshark binary for your computer.
Many linux distributions have wireshark directly available in their official package respoitories (e.g. for Ubuntu systems it can be installed using apt).
The Wireshark FAQ has a number of helpful hints and interesting tidbits of information, particularly if you have trouble installing or running Wireshark.
1.2 Running Wireshark
When you run the Wireshark program, you’ll get a startup screen, as shown below:
Figure 2: Initial Window Wireshark Screen
Take a look at the upper left hand side of the screen – you’ll see an “Interface list”. This is the list of network interfaces on your computer. Once you choose an interface, Wireshark will capture all packets on that interface. In the example above, there is an Ethernet interface (Gigabit network Connection) and a wireless interface (“Microsoft”).
The startup screen when Wireshark is running on the MacOS looks slightly different. It immediately 3

displays a list of interfaces that you can select to start a capture on. Figure 3 shows the MacOS Wireshark startup screen.
Figure 3: MacOS Wireshark Startup Screen
If you click on one of these interfaces to start packet capture (i.e., for Wireshark to begin capturing all packets being sent to/from that interface), a screen like the one below will be displayed, showing information about the packets being captured. Once you start packet capture, you can stop it by using the Capture pull down menu and selecting Stop.
4

Figure 4: Wireshark Graphical User Interface, during packet capture and analysis The Wireshark interface has five major components:
• The command menus are standard pulldown menus located at the top of the window. Of interest to us now are the File and Capture menus. The File menu allows you to save captured packet data or open a file containing previously captured packet data, and exit the Wireshark application. The Capture menu allows you to begin packet capture.
• The packet-listing window displays a one-line summary for each packet captured, includ- ing the packet number (assigned by Wireshark; this is not a packet number contained in any protocol’s header), the time at which the packet was captured, the packet’s source and destination addresses, the protocol type, and protocol-specific information contained in the packet. The packet listing can be sorted according to any of these categories by clicking on a column name. The protocol type field lists the highest-level protocol that sent or received this packet, i.e., the protocol that is the source or ultimate sink for this packet.
• The packet-header details window provides details about the packet selected (highlighted) in the packet-listing window. (To select a packet in the packet-listing window, place the cursor over the packet’s one-line summary in the packet-listing window and click with the left mouse button.). These details include information about the Ethernet frame (assuming the packet
5

• •
1.3
was sent/received over an Ethernet interface) and IP datagram that contains this packet. The amount of Ethernet and IP-layer detail displayed can be expanded or minimized by clicking on the plus minus boxes to the left of the Ethernet frame or IP datagram line in the packet details window. If the packet has been carried over TCP or UDP, TCP or UDP details will also be displayed, which can similarly be expanded or minimized. Finally, details about the highest-level protocol that sent or received this packet are also provided.
The packet-contents window displays the entire contents of the captured frame, in both ASCII and hexadecimal format.
Towards the top of the Wireshark graphical user interface, is the packet display filter field, into which a protocol name or other information can be entered in order to filter the information displayed in the packet-listing window (and hence the packet-header and packet- contents windows). In the example below, we’ll use the packet-display filter field to have Wireshark hide (not display) packets except those that correspond to HTTP messages.
Taking Wireshark for a Test Run
The best way to learn about any new piece of software is to try it out! We’ll assume that your computer is connected to the Internet via a wired Ethernet interface. Indeed, I recommend that you do this first lab on a computer that has a wired Ethernet connection, rather than just a wireless connection.
Do the following
• Start up your favorite web browser, which will display your selected homepage.
• Start up the Wireshark software. You will initially see a window similar to that shown in Figure 2. Wireshark has not yet begun capturing packets.
• To begin packet capture, select the Capture pull down menu and select Interfaces. This will cause the “Wireshark: Capture Interfaces Window” to be displayed, as shown in Figure 5.
Figure 5: Wireshrk Capture Interface Window
On MacOS simply select the interface from the startup screen to start a capture.
6

• You’ll see a list of the interfaces on your computer as well as a count of the packets that have been observed on that interface so far. Click on Start for the interface on which you want to begin packet capture (in the case, the Gigabit network Connection). Packet capture will now begin -Wireshark is now capturing all packets being sent/received from/by your computer!
• Once you begin packet capture, a window similar to that shown in Figure 3 will appear. This window shows the packets being captured. By selecting Capture pulldown menu and selecting Stop, you can stop packet capture. But don’t stop packet capture yet. Let’s capture some interesting packets first. To do so, we’ll need to generate some network traffic. Let’s do so using a web browser, which will use the HTTP protocol that we will study in detail in class to download content from a website.
• While Wireshark is running, enter the URL: http://gaia.cs.umass.edu/wireshark-labs/INTRO-wireshark-file1.html
• After your browser has displayed the INTRO-wireshark-file1.html page (it is a simple one line of congratulations), stop Wireshark packet capture by selecting stop in the Wireshark capture window. The main Wireshark window should now look similar to Figure 3. You now have live packet data that contains all protocol messages exchanged between your computer and other network entities! The HTTP message exchanges with the gaia.cs.umass.edu web server should appear somewhere in the listing of packets captured. But there will be many other types of packets displayed as well (see, e.g., the many different protocol types shown in the Protocol column in Figure 3). Even though the only action you took was to download a web page, there were evidently many other protocols running on your computer that are unseen by the user. We’ll learn much more about these protocols as we progress through the text! For now, you should just be aware that there is often much more going on than “meet’s the eye” and have that page displayed in your browser.
• In order to display this page, your browser will contact the HTTP server at gaia.cs.umass.edu and exchange HTTP messages with the server in order to download this page, as discussed in section 2.2 of the text. The Ethernet frames containing these HTTP messages (as well as all other frames passing through your Ethernet adapter) will be captured by Wireshark.
• Type in “http” (without the quotes, and in lower case – all protocol names are in lower case in Wireshark) into the display filter specification window at the top of the main Wireshark window. Then select Apply (to the right of where you entered “http”). This will cause only HTTP message to be displayed in the packet-listing window.
• Find the HTTP GET message that was sent from your computer to the gaia.cs.umass.edu HTTP server. (Look for an HTTP GET message in the “listing of captured packets” portion of the Wireshark window (see Figure 3) that shows “GET” followed by the gaia.cs.umass.edu URL that you entered. When you select the HTTP GET message, the Ethernet frame, IP datagram, TCP segment, and HTTP message header information will be displayed in the packet-header window (REF). By clicking on ‘+’ and ‘-’ right-pointing and down-pointing arrowheads to the left side of the packet details window, Minimize the amount of Frame,
7

Ethernet, Internet Protocol, and Transmission Control Protocol information displayed. Max- imize the amount information displayed about the HTTP protocol. Your Wireshark display should now look roughly as shown in Figure 5. (Note, in particular, the minimized amount of protocol information for all protocols except HTTP, and the maximized amount of protocol information for HTTP in the packet-header window).
• Exit Wireshark.
Congratulations! You’ve now completed the first lab.
Figure 6: Windows Wireshark window after browser connects to webpage.
8

Figure 7: MacOS Capture Screen
1.4 What to hand in for this section
The goal of this first part was primarily to introduce you to Wireshark. The following questions will demonstrate that you’ve been able to get Wireshark up and running, and have explored some of its capabilities. Answer the following questions, based on your Wireshark experimentation:
1. List 3 different protocols that appear in the protocol column in the unfiltered packet-listing window in step 7 above.
2. How long did it take from when the HTTP GET message was sent until the HTTP OK reply was received? (By default, the value of the Time column in the packet-listing window is the amount of time, in seconds, since Wireshark tracing began. To display the Time field in time-of-day format, select the Wireshark View pull down menu, then select Time Display Format, then select Time-of-day.)
3. What is the Internet address of the gaia.cs.umass.edu (also known as wwwnet.cs.umass.edu)? What is the Internet address of your computer?
9

4. Print the two HTTP messages (GET and OK) referred to in question 2 above. To do so, select Print from the Wireshark File command menu, and select the “Selected Packet Only” and “Print as displayed” radial buttons, and then click OK.
2 HTTP
Having gotten our feet wet with the Wireshark packet sniffer in the introductory lab, we’re now ready to use Wireshark to investigate protocols in operation. In this part, we’ll explore several aspects of the HTTP protocol: the basic GET/response interaction, HTTP message formats, re- trieving large HTML files, retrieving HTML files with embedded objects, and HTTP authentication and security. Before beginning this part, you might want to review Section 2.2 of the text.
2.1 The Basic HTTP GET/response interaction
Let’s begin our exploration of HTTP by downloading a very simple HTML file – one that is very short, and contains no embedded objects. Do the following:
• Start up your web browser.
• Start up the Wireshark packet sniffer, as described in the previous section (but don’t yet begin packet capture). Enter “http” (just the letters, not the quotation marks) in the display-filter- specification window, so that only captured HTTP messages will be displayed later in the packet-listing window. (We’re only interested in the HTTP protocol here, and don’t want to see the clutter of all captured packets).
• Wait a bit more than one minute (we’ll see why shortly), and then begin Wireshark packet capture.
• Enter the following to your browser http://gaia.cs.umass.edu/wireshark-labs/HTTP-wireshark-file1.html
• Your browser should display the very simple, one-line HTML file.
• Stop Wireshark packet capture.
Your Wireshark window should loop similar to the window shown in Figure 1.
10

Figure 8: Wireshark Display after http://gaia.cs.umass.edu/wireshark-labs/HTTP-wireshark- file1.html has been retrieved by your browser.
The example in Figure 8 shows in the packet-listing window that two HTTP messages were cap- tured: the GET message (from your browser to the gaia.cs.umass.edu web server) and the response message from the server to your browser. The packet-contents window shows details of the selected message (in this case the HTTP OK message, which is highlighted in the packet-listing window). Recall that since the HTTP message was carried inside a TCP segment, which was carried inside an IP datagram, which was carried within an Ethernet frame, Wireshark displays the Frame, Ether- net, IP, and TCP packet information as well. We want to minimize the amount of non-HTTP data displayed (we’re interested in HTTP here, and will be investigating these other protocols is later labs), so make sure the boxes at the far left of the Frame, Ethernet, IP and TCP information have a plus sign or a right-pointing triangle (which means there is hidden, undisplayed information), and the HTTP line has a minus sign or a down-pointing triangle (which means that all information about the HTTP message is displayed).
(Note: You should ignore any HTTP GET and response for favicon.ico. If you see a reference to this file, it is your browser automatically asking the server if it (the server) has a small icon file that should be displayed next to the displayed URL in your browser. We’ll ignore references to this pesky file in this lab.).
By looking at the information in the HTTP GET and response messages, answer the following questions. When answering the following questions, you should print out the GET and response messages (see the introductory Wireshark lab for an explanation of how to do this) and indicate where in the message you’ve found the information that answers the following questions. When
11

you hand in your assignment, annotate the output so that it’s clear where in the output you’re getting the information for your answer.
1. Is your browser running HTTP version 1.0 or 1.1? What version of HTTP is the server running?
2. What languages (if any) does your browser indicate that it can accept to the server?
3. What is the IP address of your computer? Of the gaia.cs.umass.edu server?
4. What is the status code returned from the server to your browser?
5. When was the HTML file that you are retrieving last modified at the server?
6. How many bytes of content are being returned to your browser?
7. By inspecting the raw data in the packet content window, do you see any headers within the data that are not displayed in the packet-listing window? If so, name one.
In your answer to question 5 above, you might have been surprised to find that the document you just retrieved was last modified within a minute before you downloaded the document. That’s because (for this particular file), the gaia.cs.umass.edu server is setting the file’s last-modified time to be the current time, and is doing so once per minute. Thus, if you wait a minute between accesses, the file will appear to have been recently modified, and hence your browser will download a “new” copy of the document.
2.2 The HTTP CONDITIONAL GET/response interaction
Recall from Section 2.2.6 of the text, that most web browsers perform object caching and thus perform a conditional GET when retrieving an HTTP object. Before performing the steps below, make sure your browser’s cache is empty. (To do this under Firefox, select Tools-Clear Recent History and check the Cache box; these actions will remove cached files from your browser’s cache.)
Now do the following:
• Start up your web browser, and make sure your browser’s cache is cleared, as discussed above
• Start up the Wireshark packet sniffer.
• Enter the following URL into your browser
http://gaia.cs.umass.edu/wireshark-labs/HTTP-wireshark-file2.html
• Your browser should display a very simple five-line HTML file.
• Quickly enter the same URL into your browser again (or simply select the refresh button on your browser)
12

• Stop Wireshark packet capture, and enter “http” in the display-filter-specification window, so that only captured HTTP messages will be displayed later in the packet-listing window.
• (Note: If you are unable to run Wireshark on a live network connection, you can use the http-ethereal-trace-2 packet trace to answer the questions below; see footnote 1. This trace file was gathered while performing the steps above on one of the author’s computers.)
Answer the following questions:
8. Inspect the contents of the first HTTP GET request from your browser to the server. Do you see an “IF-MODIFIED-SINCE” line in the HTTP GET?
9. Inspect the contents of the server response. Did the server explicitly return the contents of the file? How can you tell?
10. Now inspect the contents of the second HTTP GET request from your browser to the server. Do you see an “IF-MODIFIED-SINCE:” line in the HTTP GET? If so, what information follows the “IF-MODIFIED-SINCE:” header?
11. What is the HTTP status code and phrase returned from the server in response to this second HTTP GET? Did the server explicitly return the contents of the file? Explain.
2.3 Retrieving Long Documents
In our examples thus far, the documents retrieved have been simple and short HTML files. Let’s next see what happens when we download a long HTML file.
Do the following:
• Start up your web browser, and make sure your browser’s cache is cleared, as discussed above.
• Start up the Wireshark packet sniffer
• Enter the following URL into your browser
http://gaia.cs.umass.edu/wireshark-labs/HTTP-wireshark-file3.html
Your browser should display the rather lengthy US Bill of Rights.
• Stop Wireshark packet capture, and enter “http” in the display-filter-specification window, so that only captured HTTP messages will be displayed.
In the packet-listing window, you should see your HTTP GET message, followed by a multiple- packet TCP response to your HTTP GET request. This multiple-packet response deserves a bit of explanation. Recall from Section 2.2 (see Figure 2.9 in the text) that the HTTP response message consists of a status line, followed by header lines, followed by a blank line, followed by the entity body. In the case of our HTTP GET, the entity body in the response is the entire
13

requested HTML file. In our case here, the HTML file is rather long, and at 4500 bytes is too large to fit in one TCP packet. The single HTTP response message is thus broken into several pieces by TCP, with each piece being contained within a separate TCP segment (see Figure 1.24 in the text). In recent versions of Wireshark, Wireshark indicates each TCP segment as a separate packet, and the fact that the single HTTP response was fragmented across multiple TCP packets is indicated by the “TCP segment of a reassembled PDU” in the Info column of the Wireshark display. Earlier versions of Wireshark used the “Continuation” phrase to indicated that the entire content of an HTTP message was broken across multiple TCP segments.. We stress here that there is no “Continuation” message in HTTP!
Answer the following questions:
12. How many HTTP GET request message did your browser send? Which packet number in the trace contains the GET message for the Bill of Rights?
13. Which packet number in the trace contains the status code and phrase associated with the response to the HTTP GET request?
14. What is the status code and phrase in the response?
15. How many data-containing TCP segments were needed to carry the single HTTP response and the text of the Bill of Rights?
2.4 HTML Documents with Embedded Objects
Now that we’ve seen how Wireshark displays the captured packet traffic for large HTML files, we can look at what happens when your browser downloads a file with embedded objects, i.e., a file that includes other objects (in the example below, image files) that are stored on another server(s).
Do the following:
• Start up your web browser, and make sure your browser’s cache is cleared, as discussed above.
• Start up the Wireshark packet sniffer
• Enter the following URL into your browser
http://gaia.cs.umass.edu/wireshark-labs/HTTP-wireshark-file4.html
Your browser should display a short HTML file with two images. These two images are referenced in the base HTML file. That is, the images themselves are not contained in the HTML; instead the URLs for the images are contained in the downloaded HTML file. As discussed in the textbook, your browser will have to retrieve these logos from the indicated web sites. Our publisher’s logo is retrieved from the www.aw-bc.com web site. The image of the cover for our 5th edition (one of our favorite covers) is stored at the manic.cs.umass.edu server.
14

• Stop Wireshark packet capture, and enter “http” in the display-filter-specification window, so that only captured HTTP messages will be displayed.
Answer the following questions:
16. 17.
2.5
How many HTTP GET request messages did your browser send? To which Internet addresses were these GET requests sent?
Can you tell whether your browser downloaded the two images serially, or whether they were downloaded from the two web sites in parallel? Explain.
HTTP Authentication
Finally, let’s try visiting a web site that is password-protected and examine the sequence of HTTP message exchanged for such a site. The URL
http://gaia.cs.umass.edu/wireshark-labs/protected pages/HTTP-wireshark-file5.html
is password protected. The username is “wireshark-students” (without the quotes), and the pass- word is “network” (again, without the quotes). So let’s access this “secure” password-protected site.
Do the following:
• Make sure your browser’s cache is cleared, as discussed above, and close down your browser. Then, start up your browser
• Start up the Wireshark packet sniffer
• Enter the following URL into your browser
http://gaia.cs.umass.edu/wireshark-labs/protected pages/HTTP-wireshark-file5.html
Type the requested user name and password into the pop up box
• Stop Wireshark packet capture, and enter “http” in the display-filter-specification window, so that only captured HTTP messages will be displayed later in the packet-listing window.
Now let’s examine the Wireshark output. You might want to first read up on HTTP authentication by reviewing the easy-to-read material on “HTTP Access Authentication Framework” here.
Answer the following questions:
18. What is the server’s response (status code and phrase) in response to the initial HTTP GET message from your browser?
15

19. When your browser’s sends the HTTP GET message for the second time, what new field is included in the HTTP GET message?
The username (wireshark-students) and password (network) that you entered are encoded in the string of characters (d2lyZXNoYXJrLXN0dWRlbnRzOm5ldHdvcms=) following the “Authoriza- tion: Basic” header in the client’s HTTP GET message. While it may appear that your username and password are encrypted, they are simply encoded in a format known as Base64 format. The username and password are not encrypted! To see this, go here and enter the base64-encoded string d2lyZXNoYXJrLXN0dWRlbnRz and decode. Voila! You have translated from Base64 encoding to ASCII encoding, and thus should see your username! To view the password, enter the remainder of the string Om5ldHdvcms= and press decode. Since anyone can download a tool like Wireshark and sniff packets (not just their own) passing by their network adaptor, and anyone can translate from Base64 to ASCII (you just did it!), it should be clear to you that simple passwords on WWW sites are not secure unless additional measures are taken.
Fear not! Chapter 8 discusses ways to make WWW access more secure. However, we’ll clearly need something that goes beyond the basic HTTP authentication framework!
3 DNS
As described in Section 2.4 of the text, the Domain Name System (DNS) translates hostnames to IP addresses, fulfilling a critical role in the Internet infrastructure. In this lab, well take a closer look at the client side of DNS. Recall that the clients role in the DNS is relatively simple – a client sends a query to its local DNS server, and receives a response back. As shown in Figures 2.19 and 2.20 in the textbook, much can go on “under the covers,” invisible to the DNS clients, as the hierarchical DNS servers communicate with each other to either recursively or iteratively resolve the clients DNS query. From the DNS clients standpoint, however, the protocol is quite simple – a query is formulated to the local DNS server and a response is received from that server.
Before beginning this lab, youll probably want to review DNS by reading Section 2.4 of the text. In particular, you may want to review the material on local DNS servers, DNS caching, DNS records and messages, and the TYPE field in the DNS record.
3.1 nslookup
In this lab, well make extensive use of the nslookup tool, which is available in most Linux/Unix and Microsoft platforms today. To run nslookup in Linux/Unix, you just type the nslookup command on the command line. To run it in Windows, open the Command Prompt and run nslookup on the command line.
In it is most basic operation, nslookup tool allows the host running the tool to query any specified DNS server for a DNS record. The queried DNS server can be a root DNS server, a top-level- domain DNS server, an authoritative DNS server, or an intermediate DNS server (see the textbook for definitions of these terms). To accomplish this task, nslookup sends a DNS query to the
16

specified DNS server, receives a DNS reply from that same DNS server, and displays the result.
Figure 9: The above screenshot shows the results of three independent nslookup commands (dis- played in the Windows Command Prompt).
In this example, the client host is located on the campus of Polytechnic University in Brooklyn, where the default local DNS server is dns-prime.poly.edu. When running nslookup, if no DNS server is specified, then nslookup sends the query to the default DNS server, which in this case is dns-prime.poly.edu. Consider the first command:
nslookup www.mit.edu
In words, this command is saying “please send me the IP address for the host www.mit.edu”. As shown in the screenshot, the response from this command provides two pieces of information: (1) the name and IP address of the DNS server that provides the answer; and (2) the answer itself, which is the host name and IP address of www.mit.edu. Although the response came from the local DNS server at Polytechnic University, it is quite possible that this local DNS server iteratively contacted several other DNS servers to get the answer, as described in Section 2.4 of the textbook. Now consider the second command:
nslookup –type=NS mit.edu
In this example, we have provided the option “-type=NS” and the domain “mit.edu”. This causes nslookup to send a query for a type-NS record to the default local DNS server. In words, the query is saying, “please send me the host names of the authoritative DNS for mit.edu”. (When the –type option is not used, nslookup uses the default, which is to query for type A records.) The answer, displayed in the above screenshot, first indicates the DNS server that is providing the answer (which
17

is the default local DNS server) along with three MIT nameservers. Each of these servers is indeed an authoritative DNS server for the hosts on the MIT campus. However, nslookup also indicates that the answer is “non-authoritative,” meaning that this answer came from the cache of some server rather than from an authoritative MIT DNS server. Finally, the answer also includes the IP addresses of the authoritative DNS servers at MIT. (Even though the type-NS query generated by nslookup did not explicitly ask for the IP addresses, the local DNS server returned these “for free” and nslookup displays the result.)
Now finally consider the third command:
nslookup www.aiit.or.kr bitsy.mit.edu
In this example, we indicate that we want to the query sent to the DNS server bitsy.mit.edu rather than to the default DNS server (dns-prime.poly.edu). Thus, the query and reply transaction takes place directly between our querying host and bitsy.mit.edu. In this example, the DNS server bitsy.mit.edu provides the IP address of the host www.aiit.or.kr, which is a web server at the Advanced Institute of Information Technology (in Korea).
Now that we have gone through a few illustrative examples, you are perhaps wondering about the general syntax of nslookup commands. The syntax is:
nslookup –option1 –option2 host-to-find dns-server
In general, nslookup can be run with zero, one, two or more options. And as we have seen in the above examples, the dns-server is optional as well; if it is not supplied, the query is sent to the default local DNS server.
Now that we have provided an overview of nslookup, it is time for you to test drive it yourself. Do the following (and write down the results):
1. Run nslookup to obtain the IP address of a Web server in Asia. What is the IP address of that server?
2. Run nslookup to determine the authoritative DNS servers for a university in Europe.
3. Run nslookup so that one of the DNS servers obtained in Question 2 is queried for the mail
servers for Yahoo! mail. What is its IP address?
3.2 ipconfig/ifconfig
ipconfig (for Windows) and ifconfig (for Linux/Unix/MacOS) are among the most useful little utilities in your host, especially for debugging network issues. Here well only describe ipconfig, although the Linux/Unix/MacOS ifconfig is very similar. ipconfig can be used to show your current TCP/IP information, including your address, DNS server addresses, adapter type and so on. For example, if you all this information about your host simply by entering
18

ipconfig /all
into the Command Prompt, as shown in the following screenshot (or ifconfig -a).
Figure 10: Screenshot of ipconfig /all
ipconfig is also very useful for managing the DNS information stored in your host. In Section 2.5 we learned that a host can cache DNS records it recently obtained. To see these cached records, provide the following command:
ipconfig /displaydns
Displaying the cache entries on the latest version of the MacOS is more difficult. The following steps should allow you to display the dns cache entries.
• Open two command terminals.
• In window 1 type the following command line:
log stream –predicate process == ‘‘mDNSResponder” –info
• In window 2 type the following command line: sudo killall -INFO mDNSResponder
The DNS cache entries should be displayed in the first command window. Each entry shows the remaining Time to Live (TTL) in seconds. To clear the cache, enter
19

ipconfig /flushdns
on MacOS use
sudo dscacheutil -flushcache
on Linux use
sudo /etc/init.d/nscd restart
Flushing the DNS cache clears all entries and reloads the entries from the hosts file.
3.3 Tracing DNS with Wireshark
Now that we are familiar with nslookup and ipconfig, were ready to get down to some serious business. Lets first capture the DNS packets that are generated by ordinary Web-surfing activity.
• Use ipconfig or dscacheutil or /etc/init.d/nscd to empty the DNS cache in your host.
• Open your browser and empty your browser cache.
• Open Wireshark and enter “ip.addr == your IP address” into the filter, where you obtain your IP address with ipconfig/ifconfig. This filter removes all packets that neither origi- nate nor are destined to your host.
• Start packet capture in Wireshark.With your browser, visit the Web page: http://www.ietf.org
• Stop packet capture.
Answer the following questions. Whenever possible, when answering a question below, you should hand in a printout of the packet(s) within the trace that you used to answer the question asked. Annotate the printout to explain your answer. To print a packet, use File-Print, choose Selected packet only, choose Packet summary line, and select the minimum amount of packet detail that you need to answer the question.
4. Locate the DNS query and response messages. Are then sent over UDP or TCP?
5. What is the destination port for the DNS query message? What is the source port of DNS response message?
6. To what IP address is the DNS query message sent? Use ipconfig to determine the IP address of your local DNS server. Are these two IP addresses the same?
7. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”?
20

8. Examine the DNS response message. How many “answers” are provided? What do each of these answers contain?
9. Consider the subsequent TCP SYN packet sent by your host. Does the destination IP address of the SYN packet correspond to any of the IP addresses provided in the DNS response message?
10. This web page contains images. Before retrieving each image, does your host issue new DNS queries?
Now lets play with nslookup.
• Start packet capture.
• Do a nslookup on www.mit.edu • Stop packet capture.
You should get a trace that looks something like the following:
Figure 11: Trace of nslookup
We see from the above screenshot that nslookup actually sent three DNS queries and received
three DNS responses. For the purpose of this assignment, in answering the following questions, 21

ignore the first two sets of queries/responses, as they are specific to nslookup and are not normally generated by standard Internet applications. You should instead focus on the last query and response messages.
11. What is the destination port for the DNS query message? What is the source port of DNS response message?
12. To what IP address is the DNS query message sent? Is this the IP address of your default local DNS server?
13. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”?
14. Examine the DNS response message. How many “answers” are provided? What do each of these answers contain?
15. Provide a screenshot.
Now repeat the previous experiment, but instead issue the command:
nslookup –type=NS mit.edu
Answer the following questions:
16. To what IP address is the DNS query message sent? Is this the IP address of your default local DNS server?
17. Examine the DNS query message. What “Type” of DNS query is it? Does the query message contain any “answers”?
18. Examine the DNS response message. What MIT nameservers does the response message provide? Does this response message also provide the IP addresses of the MIT namesers?
19. Provide a screenshot.
4 Grading
You should turn in your answers and annotated printouts to the indicated questions to the ap- propriate crowdmark assignment. Each question within each section is worth the same number of points. The summary for how the points / questions are distributed between the sections is described in the following table.
Section
1 – Getting Started 2 – HTTP
3 – DNS
Num Questions Points
4 10 19 45 19 45
22

5 Office Hours
You can contact TA Jonathon Fleck at fleckjo1@msu.edu if you have any questions about the project or need to setup additional office hours. The planned office horus for this project are as follows (all times are in EST).
Week
Tuesday Wednesday Friday
11/9 – 11/13 2-3 11/16 – 11/20 2-3
2-3 NA 2-3 2-3
23