# file: planAhead_ise.tcl
#
# (c) Copyright 2008 – 2011 Xilinx, Inc. All rights reserved.
#
# This file contains confidential and proprietary information
# of Xilinx, Inc. and is protected under U.S. and
# international copyright and other intellectual property
# laws.
#
# DISCLAIMER
# This disclaimer is not a license and does not grant any
# rights to the materials distributed herewith. Except as
# otherwise provided in a valid license issued to you by
# Xilinx, and to the maximum extent permitted by applicable
# law: (1) THESE MATERIALS ARE MADE AVAILABLE “AS IS” AND
# WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
# AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
# BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
# INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
# (2) Xilinx shall not be liable (whether in contract or tort,
# including negligence, or under any other theory of
# liability) for any loss or damage of any kind or nature
# related to, arising under or in connection with these
# materials, including for any direct, or any indirect,
# special, incidental, or consequential loss or damage
# (including loss of data, profits, goodwill, or any type of
# loss or damage suffered as a result of any action brought
# by a third party) even if such damage or loss was
# reasonably foreseeable or Xilinx had been advised of the
# possibility of the same.
#
# CRITICAL APPLICATIONS
# Xilinx products are not designed or intended to be fail-
# safe, or for use in any application requiring fail-safe
# performance, such as life-support or safety devices or
# systems, Class III medical devices, nuclear facilities,
# applications related to the deployment of airbags, or any
# other applications that could lead to death, personal
# injury, or severe property or environmental damage
# (individually and collectively, “Critical
# Applications”). Customer assumes the sole risk and
# liability of any use of Xilinx products in Critical
# Applications, subject only to applicable laws and
# regulations governing limitations on product liability.
#
# THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
# PART OF THIS FILE AT ALL TIMES.
#
set projDir [file dirname [info script]]
set projName clock10MHz
set topName clock10MHz_exdes
set device xc7z010clg400-3
create_project $projName $projDir/results/$projName -part $device
set_property design_mode RTL [get_filesets sources_1]
## Source files
#set verilogSources [glob $srcDir/*.v]
import_files -fileset [get_filesets sources_1] -force -norecurse ../../example_design/clock10MHz_exdes.vhd
import_files -fileset [get_filesets sources_1] -force -norecurse ../../../clock10MHz.vhd
#UCF file
import_files -fileset [get_filesets constrs_1] -force -norecurse ../../example_design/clock10MHz_exdes.ucf
set_property top $topName [get_property srcset [current_run]]
launch_runs -runs synth_1
wait_on_run synth_1
set_property add_step Bitgen [get_runs impl_1]
launch_runs -runs impl_1
wait_on_run impl_1