clk_wiz_v3_6_vinfo
CHANGE LOG for LogiCORE Clocking Wizard V3.6
Release Date: June 19, 2013
——————————————————————————–
Table of Contents
1. INTRODUCTION
2. DEVICE SUPPORT
3. NEW FEATURE HISTORY
4. RESOLVED ISSUES
5. KNOWN ISSUES & LIMITATIONS
6. TECHNICAL SUPPORT & FEEDBACK
7. CORE RELEASE HISTORY
8. LEGAL DISCLAIMER
——————————————————————————–
1. INTRODUCTION
For installation instructions for this release, please go to:
www.xilinx.com/ipcenter/coregen/ip_update_install_instructions.htm
For system requirements:
www.xilinx.com/ipcenter/coregen/ip_update_system_requirements.htm
This file contains release notes for the Xilinx LogiCORE IP Clocking Wizard v3.6
solution. For the latest core updates, see the product page at:
www.xilinx.com/products/design_resources/conn_central/solution_kits/wizards/
……………………………………………………………………..
2. DEVICE SUPPORT
2.1 ISE
The following device families are supported by the core for this release.
All 7 Series devices
Zynq-7000 devices
Zynq-7000
Defense Grade Zynq-7000Q (XQ)
All Virtex-6 devices
All Spartan-6 devices
……………………………………………………………………..
3. NEW FEATURE HISTORY
3.1 ISE
– Spread Spectrum support for 7 series MMCME2
– ISE 14.2 software support
……………………………………………………………………..
4. RESOLVED ISSUES
4.1 ISE
Resolved issue with example design becoming core top in planAhead
Resolved issue with Virtex6 MMCM instantiation for VHDL project
Please refer to AR 50719 – www.xilinx.com/support/answers/50719.htm
……………………………………………………………………..
5. KNOWN ISSUES & LIMITATIONS
5.1 ISE
The most recent information, including known issues, workarounds, and
resolutions for this version is provided in the IP Release Notes Guide
located at
www.xilinx.com/support/documentation/user_guides/xtp025.pdf
……………………………………………………………………..
6. TECHNICAL SUPPORT & FEEDBACK
To obtain technical support, create a WebCase at www.xilinx.com/support.
Questions are routed to a team with expertise using this product.
Xilinx provides technical support for use of this product when used
according to the guidelines described in the core documentation, and
cannot guarantee timing, functionality, or support of this product for
designs that do not follow specified guidelines.
……………………………………………………………………..
7. CORE RELEASE HISTORY
Date By Version Description
================================================================================
06/19/2013 Xilinx, Inc. 3.6(Rev3) ISE 14.6 support
10/16/2012 Xilinx, Inc. 3.6(Rev2) ISE 14.3 support
07/25/2012 Xilinx, Inc. 3.6 ISE 14.2 support
04/24/2012 Xilinx, Inc. 3.5 ISE 14.1 support
01/18/2012 Xilinx, Inc. 3.3 ISE 13.4 support
06/22/2011 Xilinx, Inc. 3.2 ISE 13.2 support
03/01/2011 Xilinx, Inc. 3.1 ISE 13.1 support
12/14/2010 Xilinx, Inc. 1.8 ISE 12.4 support
09/21/2010 Xilinx, Inc. 1.7 ISE 12.3 support
07/23/2010 Xilinx, Inc. 1.6 ISE 12.2 support
04/19/2010 Xilinx, Inc. 1.5 ISE 12.1 support
12/02/2009 Xilinx, Inc. 1.4 ISE 11.4 support
09/16/2009 Xilinx, Inc. 1.3 ISE 11.3 support
06/24/2009 Xilinx, Inc. 1.2 ISE 11.2 support
04/24/2009 Xilinx, Inc. 1.1 Initial release; 11.1 support
================================================================================
……………………………………………………………………..
8. LEGAL DISCLAIMER
(c) Copyright 2008 – 2013 Xilinx, Inc. All rights reserved.
This file contains confidential and proprietary information
of Xilinx, Inc. and is protected under U.S. and
international copyright and other intellectual property
laws.
DISCLAIMER
This disclaimer is not a license and does not grant any
rights to the materials distributed herewith. Except as
otherwise provided in a valid license issued to you by
Xilinx, and to the maximum extent permitted by applicable
law: (1) THESE MATERIALS ARE MADE AVAILABLE “AS IS” AND
WITH ALL FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES
AND CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY, INCLUDING
BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, NON-
INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE; and
(2) Xilinx shall not be liable (whether in contract or tort,
including negligence, or under any other theory of
liability) for any loss or damage of any kind or nature
related to, arising under or in connection with these
materials, including for any direct, or any indirect,
special, incidental, or consequential loss or damage
(including loss of data, profits, goodwill, or any type of
loss or damage suffered as a result of any action brought
by a third party) even if such damage or loss was
reasonably foreseeable or Xilinx had been advised of the
possibility of the same.
CRITICAL APPLICATIONS
Xilinx products are not designed or intended to be fail-
safe, or for use in any application requiring fail-safe
performance, such as life-support or safety devices or
systems, Class III medical devices, nuclear facilities,
applications related to the deployment of airbags, or any
other applications that could lead to death, personal
injury, or severe property or environmental damage
(individually and collectively, “Critical
Applications”). Customer assumes the sole risk and
liability of any use of Xilinx products in Critical
Applications, subject only to applicable laws and
regulations governing limitations on product liability.
THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS
PART OF THIS FILE AT ALL TIMES.