Constructing VHDL Models with CSA
List all components (e.g., gate) inclusive propagation delays.
Identify input/output signals as input/output ports.
All remaining signals are internal signals.
Identify type of each internal, input and output signal as e.g. std_logic, std_logic_vector .
Use the information to complete the template on the following slide.
If there are N signals and output ports, there will be N CSA statements in the VHDL model.
CSA statements maintain a close correspondence with the hardware being modelled.
CSA is only one out of many alternative VHDL constructs.
CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 1
CSA-VHDL model template
library library-name-1, library-name-2; use library-name-1.package-name.ALL; use library-name-2.package-name.ALL; entity entity_name is
Port (input signals: in type; output signal: out type);
end entity_name;
architecture arch_name of entity_name is
— declare internal signals
signal internal-signal-1: type := initialisation;
signal internal-signal-2: type := initialisation;
Begin
— specify value of each signal as function of other signals internal-signal-1 <= simple, conditional, or selected CSA; internal-signal-2 <= simple, conditional, or selected CSA; Output signal <= simple, conditional, or selected CSA; end arch_name; CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 2 Process Construct CSA models close to the hardware. Difficult to simulate CSA models of large complex systems at gate level. To increase level of abstraction while preserving external event behaviour we need a more powerful language construct. The process construct allows us to: Model at a higher level of abstraction. Use conventional programming language constructs. CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 3 Memory Module [entity] library IEEE; use IEEE.STD_LOGIC_1164.ALL; use IEEE.STD_LOGIC_ARITH.ALL; entity memory is — use unsigned for memory address Port ( address : in unsigned std_logic_vector(31 downto 0); write_data : in std_logic_vector(31 downto 0); MemWrite, MemRead : in std_logic; read_data : out std_logic_vector(31 downto 0)); end memory; CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 4 Memory Module [architecture] architecture Behavioral of memory is type mem_array is array(0 to 7) of std_logic_vector(31 downto 0); — define type, for memory arrays begin mem_process: process (address, write_data) — initialize data memory, X denotes hexadecimal number variable data_mem : mem_array := ( X”00000000″, X”00000000″, X”00000000″,X”00000000″, X”00000000″, X”00000000″, X”00000000″,X”00000000″); variable addr:integer begin — the following type conversion function is in std_logic_arith addr:=conv_integer(address(2 downto 0)); if MemWrite =’1′ then data_mem(addr):= write_data; elsif MemRead=’1′ then read_data <= data_mem(addr) after 10 ns; end if; end process; end Behavioral; CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 5 1. Process Details A process is a sequentially executed block of code. The VHDL model on the previous two slides consists of one process that is labelled mem_process:. Similar to conventional block structured programming languages. Process begins with a declaration section followed by: begin and end process. begin determines start of sequential execution. CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 6 2. Process Details Data structures may include: Arrays, queues… Programs may use standard data types: Integer, character, real number … Variable assignment take place immediately Variable assignment := Values assigned to variables are visible to all following statements in the context of this process. Control flow within a process is determined by constructs such as: IF-THEN-ELSE, CASE, LOOP CSU22022, 5th HDL Lecture, Dr. M. Manzke,Page: 7 3. Process Details A process can make assignments to signals decared externally. read_data <= data_mem(addr) after 10 ns; Propagation delay is taken into account. read_data is scheduled to take its new value after the time specified by the after clause has expired. The rest of the process executes in zero time with respect to simulation. A process is executed if an input signal in the list following the process has changed. The list of inputs is called sensitivity list. CSU2022, 5th HDL Lecture, Dr. M. Manzke,Page: 8