代写代考 PDP-11/40 and 11/45 computers. It offers a number of features seldom found

The UNIX Time- Sharing System
. Ritchie and Bell Laboratories
UNIX is a general-purpose, multi-user, interactive operating system for the Digital Equipment Corpora- tion PDP-11/40 and 11/45 computers. It offers a number of features seldom found even in larger operating sys- tems, including: (1) a hierarchical file system incorpo- rating demountable volumes; (2) compatible file, device, and inter-process I/O; (3) the ability to initiate asynchro- nous processes; (4) system command language select- able on a per-user basis; and (5) over 100 subsystems including a dozen languages. This paper discusses the nature and implementation of the file system and of the user command interface.
Key Words and Phrases: time-sharing, operating system, file system, command language, PDP-11

Copyright By PowCoder代写 加微信 powcoder

CR Categories: 4.30, 4.32
Copyright © 1974, Association for Computing Machinery, Inc. General permission to republish, but not for profit, all or part of this material is granted provided that ACM’s copyright notice is given and that reference is made to the publication, to its date of issue, and to the fact that reprinting privileges were granted by permission of the Association for Computing Machinery.
This is a revised version of a paper presented at the Fourth ACM Symposium on Operating Systems Principles, IBM Thomas J. Watson Research Center, Yorktown Heights. , Octo- ber 15–17, 1973. Authors’ address: Bell Laboratories, , NJ 07974.
The electronic version was recreated by . Brewer, Uni- versity of California at Berkeley, Please notify me of any deviations from the original; I have left errors in the original unchanged.
1. Introduction
There have been three versions of UNIX. The earliest version (circa 1969–70) ran on the Digital Equipment Cor- poration PDP-7 and -9 computers. The second version ran on the unprotected PDP-11/20 computer. This paper describes only the PDP-11/40 and /45 [l] system since it is more modern and many of the differences between it and older UNIX systems result from redesign of features found to be deficient or lacking.
Since PDP-11 UNIX became operational in February 1971, about 40 installations have been put into service; they are generally smaller than the system described here. Most of them are engaged in applications such as the preparation and formatting of patent applications and other textual material, the collection and processing of trouble data from various switching machines within the Bell System, and recording and checking telephone service orders. Our own installation is used mainly for research in operating sys- tems, languages, computer networks, and other topics in computer science, and also for document preparation.
Perhaps the most important achievement of UNIX is to demonstrate that a powerful operating system for interac- tive use need not be expensive either in equipment or in human effort: UNIX can run on hardware costing as little as $40,000, and less than two man years were spent on the main system software. Yet UNIX contains a number of fea- tures seldom offered even in much larger systems. It is hoped, however, the users of UNIX will find that the most important characteristics of the system are its simplicity, elegance, and ease of use.
Besides the system proper, the major programs avail- able under UNIX are: assembler, text editor based on QED [2], linking loader, symbolic debugger, compiler for a lan- guage resembling BCPL [3] with types and structures (C), interpreter for a dialect of BASIC, text formatting program, Fortran compiler, Snobol interpreter, top-down compiler- compiler (TMG) [4], bottom-up compiler-compiler (YACC), form letter generator, macro processor (M6) [5], and per- muted index program.
There is also a host of maintenance, utility, recreation, and novelty programs. All of these programs were written locally. It is worth noting that the system is totally self-sup- porting. All UNIX software is maintained under UNIX; like- wise, UNIX documents are generated and formatted by the UNIX editor and text formatting program.
2. Hardware and Software Environment
The PDP-11/45 on which our UNIX installation is imple- mented is a 16-bit word (8-bit byte) computer with 144K bytes of core memory; UNIX occupies 42K bytes. This sys- tem, however, includes a very large number of device driv- ers and enjoys a generous allotment of space for I/O buffers and system tables; a minimal system capable of running the
365 Electronic version recreated by . of California at Berkeley
Communications of
July 1974 Volume 17 Number 7

software mentioned above can require as little as 50K bytes of core altogether.
The PDP-11 has a 1M byte fixed-head disk, used for file system storage and swapping, four moving-head disk drives which each provide 2.5M bytes on removable disk car- tridges, and a single moving-head disk drive which uses removable 40M byte disk packs. There are also a high- speed paper tape reader-punch, nine-track magnetic tape, and D-tape (a variety of magnetic tape facility in which individual records may be addressed and rewritten). Besides the console typewriter, there are 14 variable-speed communications interfaces attached to 100-series datasets and a 201 dataset interface used primarily for spooling printout to a communal line printer. There are also several
one-of-a-kind devices including a Picturephone® interface, a voice response unit, a voice synthesizer, a phototypesetter, a digital switching network, and a satellite PDP-11/20 which generates vectors, curves, and characters on a Tektronix 611 storage-tube display.
The greater part of UNIX software is written in the above-mentioned C language [6]. Early versions of the operating system were written in assembly language, but during the summer of 1973, it was rewritten in C. The size of the new system is about one third greater than the old. Since the new system is not only much easier to understand and to modify but also includes many functional improve- ments, including multiprogramming and the ability to share reentrant code among several user programs, we considered this increase in size quite acceptable.
3. The File System
The most important job of UNIX is to provide a file sys- tem. From the point of view of the user, there are three kinds of files: ordinary disk files, directories, and special files.
3.1 Ordinary Files
A file contains whatever information the user places on it, for example symbolic or binary (object) programs. No particular structuring is expected by the system. Files of text consist simply of a string of characters, with lines demarcated by the new-line character. Binary programs are sequences of words as they will appear in core memory when the program starts executing. A few user programs manipulate files with more structure: the assembler gener- ates and the loader expects an object file in a particular for- mat. However, the structure of files is controlled by the programs which use them, not by the system.
3.2 Directories
Directories provide the mapping between the names of files and the files themselves, and thus induce a structure on the file system as a whole. Each user has a directory of his
own files; he may also create subdirectories to contain groups of files conveniently treated together. A directory behaves exactly like an ordinary file except that it cannot be written on by unprivileged programs, so that the system controls the contents of directories. However, anyone with appropriate permission may read a directory just like any other file.
The system maintains several directories for its own use. One of these is the root directory. All files in the sys- tem can be found by tracing a path through a chain of direc- tories until the desired file is reached. The starting point for such searches is often the root. Another system directory contains all the programs provided for general use; that is, all the commands. As will be seen however, it is by no means necessary that a program reside in this directory for it to be executed.
Files are named by sequences of 14 or fewer charac- ters. When the name of a file is specified to the system, it may be in the form of a path name, which is a sequence of directory names separated by slashes “/” and ending in a file name. If the sequence begins with a slash, the search begins in the root directory. The name /alpha/beta/gamma causes the system to search the root for directory alpha, then to search alpha for beta, finally to find gamma in beta. Gamma may be an ordinary file, a directory, or a special file. As a limiting case, the name “/” refers to the root itself.
A path name not starting with “/” causes the system to begin the search in the user’s current directory. Thus, the name alpha/beta specifies the file named beta in subdirec- tory alpha of the current directory. The simplest kind of name, for example alpha, refers to a file which itself is found in the current directory. As another limiting case, the null file name refers to the current directory.
The same nondirectory file may appear in several directories under possibly different names. This feature is called linking; a directory entry for a file is sometimes called a link. UNIX differs from other systems in which link- ing is permitted in that all links to a file have equal status. That is, a file does not exist within a particular directory; the directory entry for a file consists merely of its name and a pointer to the information actually describing the file. Thus a file exists independently of any directory entry, although in practice a file is made to disappear along with the last link to it.
Each directory always has at least two entries. The name in each directory refers to the directory itself. Thus a program may read the current directory under the name “.” without knowing its complete path name. The name “..” by convention refers to the parent of the directory in which it appears, that is, to the directory in which it was created.
The directory structure is constrained to have the form of a rooted tree. Except for the special entries “.” and “..”, each directory must appear as an entry in exactly one other, which is its parent. The reason for this is to simplify the writing of programs which visit subtrees of the directory
366 Electronic version recreated by . of California at Berkeley
Communications of
July 1974 Volume 17 Number 7

structure, and more important, to avoid the separation of portions of the hierarchy. If arbitrary links to directories were permitted, it would be quite difficult to detect when the last connection from the root to a directory was severed.
3.3 Special Files
Special files constitute the most unusual feature of the UNIX file system. Each I/O device supported by UNIX is associated with at least one such file. Special files are read and written just like ordinary disk files, but requests to read or write result in activation of the associated device. An entry for each special file resides in directory /dev, although a link may be made to one of these files just like an ordi- nary file. Thus, for example, to punch paper tape, one may write on the file /dev/ppt. Special files exist for each com- munication line, each disk, each tape drive, and for physical core memory. Of course, the active disks and the core spe- cial file are protected from indiscriminate access.
There is a threefold advantage in treating I/O devices this way: file and device I/O are as similar as possible; file and device names have the same syntax and meaning, so that a program expecting a file name as a parameter can be passed a device name; finally, special files are subject to the same protection mechanism as regular files.
3.4 Removable File Systems
Although the root of the file system is always stored on the same device, it is not necessary that the entire file sys- tem hierarchy reside on this device. There is a mount sys- tem request which has two arguments: the name of an existing ordinary file, and the name of a direct-access spe- cial file whose associated storage volume (e.g. disk pack) should have the structure of an independent file system con- taining its own directory hierarchy. The effect of mount is to cause references to the heretofore ordinary file to refer instead to the root directory of the file system on the remov- able volume. In effect, mount replaces a leaf of the hierar- chy tree (the ordinary file) by a whole new subtree (the hierarchy stored on the removable volume). After the mount, there is virtually no distinction between files on the removable volume and those in the permanent file system. In our installation, for example, the root directory resides on the fixed-head disk, and the large disk drive, which con- tains user’s files, is mounted by the system initialization program, the four smaller disk drives are available to users for mounting their own disk packs. A mountable file system is generated by writing on its corresponding special file. A utility program is available to create an empty file system, or one may simply copy an existing file system.
There is only one exception to the rule of identical treatment of files on different devices: no link may exist between one file system hierarchy and another. This restric- tion is enforced so as to avoid the elaborate bookkeeping which would otherwise be required to assure removal of the links when the removable volume is finally dismounted. In
particular, in the root directories of all file systems, remov- able or not, the name “..” refers to the directory itself instead of to its parent.
3.5 Protection
Although the access control scheme in UNIX is quite simple, it has some unusual features. Each user of the sys- tem is assigned a unique user identification number. When a file is created, it is marked with the user ID of its owner. Also given for new files is a set of seven protection bits. Six of these specify independently read, write, and execute per- mission for the owner of the file and for all other users.
If the seventh bit is on, the system will temporarily change the user identification of the current user to that of the creator of the file whenever the file is executed as a pro- gram. This change in user ID is effective only during the execution of the program which calls for it. The set-user-ID feature provides for privileged programs which may use files inaccessible to other users. For example, a program may keep an accounting file which should neither be read nor changed except by the program itself. If the set-user- identification bit is on for the program, it may access the file although this access might be forbidden to other pro- grams invoked by the given program’s user. Since the actual user ID of the invoker of any program is always available, set-user-ID programs may take any measures desired to satisfy themselves as to their invoker’s creden- tials. This mechanism is used to allow users to execute the carefully written commands which call privileged system entries. For example, there is a system entry invocable only by the “super-user” (below) which creates an empty direc- tory. As indicated above, directories are expected to have entries for “.” and “..”. The command which creates a direc- tory is owned by the super user and has the set-user-ID bit set. After it checks its invoker’s authorization to create the specified directory, it creates it and makes the entries for “.” and “..”.
Since anyone may set the set-user-ID bit on one of his own files, this mechanism is generally available with- out administrative intervention. For example, this protection scheme easily solves the MOO accounting problem posed in [7].
The system recognizes one particular user ID (that of the “super-user”) as exempt from the usual constraints on file access; thus (for example) programs may be written to dump and reload the file system without unwanted interfer- ence from the protection system.
3.6 I/O Calls
The system calls to do I/O are designed to eliminate the differences between the various devices and styles of access. There is no distinction between “random” and sequential I/O, nor is any logical record size imposed by the system. The size of an ordinary file is determined by the
367 Electronic version recreated by . of California at Berkeley
Communications of
July 1974 Volume 17 Number 7

highest byte written on it; no predetermination of the size of a file is necessary or possible.
To illustrate the essentials of I/O in UNIX, Some of the basic calls are summarized below in an anonymous lan- guage which will indicate the required parameters without getting into the complexities of machine language program- ming. Each call to the system may potentially result in an error return, which for simplicity is not represented in the calling sequence.
To read or write a file assumed to exist already, it must be opened by the following call:
filep = open (name, flag)
Name indicates the name of the file. An arbitrary path name may be given. The flag argument indicates whether the file is to be read, written, or “updated”, that is read and written simultaneously.
The returned value filep is called a file descriptor. It is a small integer used to identify the file in subsequent calls to read, write, or otherwise manipulate it.
To create a new file or completely rewrite an old one, there is a create system call which creates the given file if it does not exist, or truncates it to zero length if it does exist. Create also opens the new file for writing and, like open, returns a file descriptor.
There are no user-visible locks in the file system, nor is there any restriction on the number of users who may have a file open for reading or writing; although it is possible for the contents of a file to become scrambled when two users write on it simultaneously, in practice, difficulties do not arise. We take the view that locks are neither necessary nor sufficient, in our environment, to prevent interference between users of the same file. They are unnecessary because we are not faced with large, single-file data bases maintained by independent processes. They are insufficient because locks in the ordinary sense, whereby one user is prevented from writing on a file which another user is read- ing, cannot prevent confusion when, for example, both users are editing a file with an editor which makes a copy of the file being edited.
It should be said that the system has sufficient internal interlocks to maintain the logical consistency of the file sys- tem when two users engage simultaneously in such incon- venient activities as writing on the same file, creating files in the same directory or deleting each other’s open files.
Except as indicated below, reading and writing are sequential. This means that if a particular byte in the file was the last byte written (or read), the next I/O call implic- itly refers to the first following byte. For each open file there is a pointer, maintained by the system, which indi- cates the next byte to be read or written. If n bytes are read or written, the pointer advances by n bytes.
Once a file is open, the following calls may be used:
n = read(filep, buffer, count) n = write(filep, buffer, count)
Up to count bytes are transmitted between the file specified by filep and the byte array specified by buffer. The returned value n is the number of bytes actually transmitted. In the write case, n is the same as count except under exceptional conditions like I/O errors or end of physical medium on spe- cial files; in a read, however, n may without error be less than count. If the read pointer is so near the end of the file that reading count characters would cause reading beyond the end, only sufficient bytes are transmitted to reach the end of the file; also, typewriter-like devices never return more than one line of

程序代写 CS代考 加微信: powcoder QQ: 1823890830 Email: powcoder@163.com