Computer Graphics
Parallel Programming: Background Information and Tips
Mike Bailey
parallel.background.pptx
Copyright By PowCoder代写 加微信 powcoder
mjb – March 22, 2021
Three Reasons to Study Parallel Programming
1. Increase performance: do more work in the same amount of time
2. Increase performance: take less time to do the same amount of work
3. Make some programming tasks more convenient to implement
Decrease the time to compute a simulation
Increase the resolution, and thus the accuracy, of a simulation
Computer Graphics
Create a web browser where the tasks of monitoring the user interface, downloading text, and downloading multiple images are happening simultaneously
mjb – March 22, 2021
Three Types of Parallelism:
1. Instruction Level Parallelism (ILP)
A program might consist of a continuous stream of assembly instructions, but it is not necessarily executed continuously. Oftentimes it has “pauses”, waiting for something to be ready so that it can proceed.
A = B + 1; C = 3;
If B is not already in cache, this instruction will block while B is fetched from memory
Out-of-order execution
capability will slide instructions up if they can be executed while waiting for the block to end
If a compiler does this, it’s called Static ILP
If the CPU chip does this, it’s called Dynamic ILP
This is all good to know, but it’s nothing we can control much of.
Prefetch B Load $3,r1 Store r1,C Load B,r0 Add $1,r0 Store r0,A
Load B,r0 Add $1,r0 Store r0,A Load $3,r1 Store r1,C
Computer Graphics
mjb – March 22, 2021
for( i = 0; i < NUM; i++ ) {
B[i]=sqrt( A[i] );
for(i=0; i < NUM/3; i++) {
B[i]=sqrt( A[i] );
for( i = NUM/3; i < 2*NUM/3; i++ ) {
B[i]=sqrt( A[i] );
for( i = 2*NUM/3; i < NUM; i++ ) {
B[i]=sqrt( A[i] );
Three Types of Parallelism: 2. Data Level Parallelism (DLP)
Executing the same instructions on different parts of the data
Computer Graphics
mjb – March 22, 2021
Three Types of Parallelism:
3. Thread Level Parallelism (TLP)
Executing different instructions Example: processing a variety of incoming transaction requests
Different Tasks/Functions
thread thread thread
In general, TLP implies that you have more threads than cores
Thread execution switches when a thread blocks or uses up its time slice
Computer Graphics
mjb – March 22, 2021
Flynn’s Taxonomy
Single Single MultipleInstruction,Multiple Data
“Normal” single- core CPU
GPUs, Special vector CPU instructions
Multiple processors running independently
Computer Graphics
mjb – March 22, 2021
Instructions
Von : Basically the fundamental pieces of a CPU have not changed since the 1960s
The “Heap” (the result of a malloc or new call), is in here, along with Globals and the Stack
Other elements:
• Clock } • Registers
• Program Counter
• Stack Pointer
Control Unit
Arithmetic Logic Unit
Accumulator
Computer Graphics
mjb – March 22, 2021
These together are the “state” of the processor
What Exactly is a Process?
Processes execute a program in memory. The process keeps a state (program counter, registers, and stack).
Other elements:
• Registers
• Program Counter • Stack Pointer
Computer Graphics
mjb – March 22, 2021
Program and Data in Memory
(the heap is here too)
Registers Program Counter Stack Pointer
Von : Basically the fundamental pieces of a CPU have not changed since the 1960s
The “Heap” (the result of a malloc or new call), is in here, along with Globals and the Stack
Other elements:
• Clock } • Registers
• Program Counter
• Stack Pointer
Computer Graphics
What if we include more than one set of these?
What Exactly is a Thread?
mjb – March 22, 2021
Threads are separate independent processes, all executing a common program and sharing memory. Each thread has its own state (program counter, registers, and stack pointer).
Program and Data in Shared Memory
(the heap is shared too)
Registers Program Counter Stack Pointer
Computer Graphics
Registers Program Counter Stack Pointer
Registers Program Counter Stack Pointer
mjb – March 22, 2021
Memory Allocation in a Multithreaded Program
One-thread Multiple-threads
Computer Graphics
mjb – March 22, 2021
Program Executable
Don’t take this completely literally. The exact arrangement depends on the operating system and the compiler. For example, sometimes the stack and heap are arranged so that they grow towards each other.
Common Program Executable
Common Globals
Common Heap
What Exactly is a Thread?
A “thread” is an independent path through the program code. Each thread has its own Program Counter, Registers, and Stack Pointer. But, since each thread is executing some part of the same program, each thread has access to the same global data in memory. Each thread is scheduled and swapped just like any other process.
Threads can share time on a single processor. You don’t have to have multiple processors (although you can – the multicore topic is coming soon!).
This is useful, for example, in a web browser when you want several things to happen autonomously:
• User interface
• Communication with an external web server • Web page display
• Image loading
• Animation
Computer Graphics
mjb – March 22, 2021
When is it Good to use Multithreading?
• Where specific operations can become blocked, waiting for something else to happen
• Where specific operations can be CPU-intensive
• Where specific operations must respond to asynchronous I/O, including the user interface (UI) • Where specific operations have higher or lower priority than other operations
• To manage independent behaviors in interactive simulations
• When you want to accelerate a single program on multicore CPU chips
Threads can make it easier to have many things going on in your program at one time, and can absorb the dead-time of other threads.
Computer Graphics
mjb – March 22, 2021
Two Ways to Decompose your Problem into Parallelizable Pieces
Functional (or Task) Decomposition
Breaking a task into sub-tasks that represent separate functions.
A web browser is a good example. So is a climate modeling program:
Domain (or Data) Decomposition
Breaking a task into sub-tasks that represent separate sections of the data. An example is a large diagonally-dominant matrix solution:
“Thread Parallel”
“Data Parallel”
Computer Graphics
mjb – March 22, 2021
Data Decomposition Reduces the Problem Size per Thread
Example: A diagonally-dominant matrix solution
? • Solve within the block ?
• Break the problem into blocks
• Handle borders separately after a Barrier
*?
*?
*?
Share results across boundaries
Computer Graphics
mjb – March 22, 2021
Some Definitions
Atomic An operation that takes place to completion with no chance of being interrupted by another thread
Barrier A point in the program where all threads must reach before any of them are allowed to proceed
Coarse-grained parallelism Breaking a task up into a small number of large tasks
Deterministic The same set of inputs always gives the same outputs
Dynamic scheduling Dividing the total number of tasks T up so that each of N available threads has less than T/N sub-tasks to do, and then doling out the remaining tasks to threads as they become available
Fine-grained parallelism Breaking a task up into lots of small tasks
Fork-join An operation where multiple threads are created from a main thread. All of those forked threads are expected to eventually finish and thus “join back up” with the main thread.
Computer Graphics
Fork Fork Join Join
mjb – March 22, 2021
Reduction Combining the results from multiple threads into a single sum or product, continuing to use multithreading. Typically this is performed so that it takes O(log2N) time instead of O(N) time:
Shared variable After a fork operation, a variable which is shared among threads, i.e., has a single value
Speed-up(N) T1 / TN Speed-up Efficiency Speed-up(N) / N
Static Scheduling Dividing the total number of tasks T up so that each of N available threads has T/N sub-tasks to do
Some More Definitions
Privatevariable Afteraforkoperation,avariablewhichhasaprivatecopywithin each thread
Computer Graphics
mjb – March 22, 2021
Parallel Programming Tips
Computer Graphics
mjb – March 22, 2021
Tip #1 -- Don’t Keep Internal State
Internal state
GetLastPositiveNumber( int x ) {
static int savedX;
if( x >= 0 )
savedX = x;
return savedX;
If you do keep internal state between calls, there is a chance that a second thread will hop in and change it, then the first thread will use that state thinking it has not been changed.
Ironically, some of the standard C functions that we use all the time (e.g., strtok) keep internal state:
char * strtok ( char * str, const char * delims );
Computer Graphics
mjb – March 22, 2021
Tip #1 — Don’t Keep Internal State
char * tok1 = strtok( Line1, DELIMS ); 1
while( tok1 != NULL ) {
tok1 = strtok( NULL, DELIMS );
char * tok2 = strtok( Line2, DELIMS ); 2
while( tok2 != NULL ) {
tok2 = strtok( NULL, DELIMS );
1. Thread #1 sets the internal character array pointer to somewhere in Line1[ ].
2. Thread #2 resets the same internal character array pointer to somewhere in Line2[ ].
3. Thread #1 uses that internal character array pointer, but it is not pointing into Line1[ ] where Thread #1 thinks it left it.
Computer Graphics
mjb – March 22, 2021
Tip #1 — Keep External State Instead
Moral: if you will be multithreading, don’t use internal static variables to retain state inside of functions.
In this case, using strtok_r is preferred:
char * strtok_r( char *str, const char *delims, char **sret );
strtok_r returns its internal state to you so that you can store it locally and then can pass it back when you are ready. (The ‘r’ stands for “re-entrant”.)
Computer Graphics
mjb – March 22, 2021
Tip #1 — Keep External State Instead
char *retValue1;
char * tok1 = strtok_r( Line1, DELIMS, &retValue1 );
while( tok1 != NULL ) {
tok1 = strtok( NULL, DELIMS, &retValue1 ); };
char *retValue2;
char * tok2 = strtok( Line2, DELIMS, &retValue2 );
while( tok2 != NULL ) {
tok2 = strtok( NULL, DELIMS, &retValue2 ); };
Execution order no longer matters!
Computer Graphics
mjb – March 22, 2021
Tip #1 – Note that Keeping Global State is Just as Dangerous
Internal state: Global state:
GetLastPositiveNumber( int x ) {
int savedX;
GetLastPositiveNumber( int x ) {
static int savedX;
if( x >= 0 )
savedX = x;
return savedX;
if( x >= 0 )
savedX = x;
return savedX;
Computer Graphics
mjb – March 22, 2021
Tip #2 – Avoid Deadlock
Deadlock is when two threads are each waiting for the other to do something
Worst of all, the way these problems occur is not always deterministic!
Computer Graphics
mjb – March 22, 2021
Tip #3 – Avoid Race Conditions
A Race Condition is where it matters which thread gets to a particular piece of code first.
This often comes about when one thread is modifying a variable while the other thread is in the midst of using it
A good example is maintaining and using the pointer in a stack data structure:
Thread #1: Pushing:
4 *p = incoming ;
Thread #2: Popping:
2 outgoing = *p ;
Execution order:
Computer Graphics
mjb – March 22, 2021
Worst of all, the way these problems occur is not always deterministic!
BTW, Race Conditions can often be fixed through the use of Mutual Exclusion Locks (Mutexes)
Execution order: 1
Thread #1: Pushing:
MutexLock A {
*p = incoming ; }
Thread #2: Popping:
MutexLock A {
outgoing = *p ;
We will talk about these in a little while.
But, note that, while solving a race condition, we can accidentally create a deadlock condition if the thread that owns the lock is waiting for the other thread to do something
Computer Graphics
mjb – March 22, 2021
Mutex Locks are usually named somehow so that you can have multiple ones with no ambiguity.
Tip #4 — Sending a Message to the Optimizer: The volatile Keyword
The volatile keyword is used to let the compiler know that another thread might be changing a variable “in the background”, so don’t make any assumptions about what can be optimized away.
int val = 0;
while( val!=0 );
volatile int val = 0;
while( val!=0 );
Computer Graphics
A good compiler optimizer will eliminate this code because it “knows” that, for all time, val == 0
The volatile keyword tells the compiler optimizer that it cannot count on val being == 0 here
mjb – March 22, 2021
Tip #5 — Sending a Message to the Optimizer: The restrict Keyword
Remember our Instruction Level Parallelism example?
To assembly language
A = B + 1; C = 3;
Load B,r0 Add $1,r0 Store r0,A Load $3,r1 Store r1,C
Prefetch B Load $3,r1 Store r1,C Load B,r0 Add $1,r0 Store r0,A
Optimize by moving two instructions up to execute while B is loading
Computer Graphics
mjb – March 22, 2021
int *p; int *q ; …
A = *p + 1; *q = 3.;
Assembly language
Computer Graphics
Using the pointers, and using out-of-order processing
What’s really happening
Uh-oh! B is being loaded at the same time it is being stored into. Who gets there first?
Which value is correct?
Sending a Message to the Optimizer: The restrict Keyword
Here the example has been changed slightly. This is what worries the out-of-order mechanisms and keeps them from optimizing as much as they could.
Prefetch [p] Load $3,r1 Store r1,[q] Load [p],r0 Add $1,r0 Store r0,A
Prefetch B Load $3,r1 Store r1,B Load B,r0 Add $1,r0 Store r0,A
Load [p],r0 Add $1,r0 Store r0,A Load $3,r1 Store r1,[q]
mjb – March 22, 2021
int * restrict p; int * restrict q;
A = *p + 1; *q = 3.;
Assembly language
Computer Graphics
Using the pointers, and using out-of-order processing
What’s really happening
Now there is no conflict
Sending a Message to the Optimizer: The restrict Keyword
This is us promising that p and q will never point to the same memory location.
Prefetch [p] Load $3,r1 Store r1,[q] Load [p],r0 Add $1,r0 Store r0,A
Prefetch B Load $3,r1 Store r1,C Load B,r0 Add $1,r0 Store r0,A
Load [p],r0 Add $1,r0 Store r0,A Load $3,r1 Store r1,[q]
mjb – March 22, 2021
Tip #6 – Beware of False Sharing Caching Issues
We will get to this in the Caching notes!
Computer Graphics
mjb – March 22, 2021
程序代写 CS代考 加微信: powcoder QQ: 1823890830 Email: powcoder@163.com