COMP9315 24T1 Assignment 2 DBMS Implementation
Multi-attribute Linear Hashed Files
Last updated: Sunday 24th March 5:30pm
Most recent changes are shown in red … older changes are shown in brown.
Copyright By PowCoder代写 加微信 powcoder
This assignment aims to give you an understanding of
how database files are structured and accessed how multi-attribute hashing is implemented
how linear hashing is implemented
The goal is to build a simple implementation of a linear-hashed file structure that uses multi-attribute hashing.
Deadline: Late
Penalty: Marks: Submission:
11:59pm on Monday 15 April
0.05 marks off the final mark for each hour late
Contributes 20 marks toward your total mark for this course.
From Webcms3: Assignments > Assignment 2 > Submission > upload
From Linux: give cs9315 ass2 ass2.zip
The ass2.zip file must contain your Makefile plus all of your *.c and *.h files. Details on how to build the ass2.zip file are given below.
Make sure that you read this assignment specification carefully and completely before starting work on the assignment.
Questions which indicate that you haven’t done this will simply get the response “Please read the spec”.
Note: this assignment does not require you to do anything with PostgreSQL. Introduction
Linear hashed files and multi-attribute hashing are two techniques that can be used together to produce hashed files that grow as needed and which allow all attributes to contribute to the hash value of each tuple. See the course notes and lecture slides for further details on linear hashed files and multi-attribute hashing.
In our context, multi-attribute linear-hashed (MALH) files are file structures that represent one relational table, and can be manipulated by three commands:
A create command
Creates MALH files by accepting four command line arguments:
the name of the relation
the number of attributes
the initial number of data pages (rounded up to nearest 2n) the multi-attribute hashing choice vector
This gives you storage for one relation/table, and is analogous to making an SQL data definition like:
create table R ( a1 text, a2 text, … an text );
Note that, internally, attributes are indexed 0..n-1 rather than 1..n.
The following example of using create makes a table called abc with 4 attributes and 8 initial data
$ ./create abc 4 6 “0,0:0,1:1,0:1,1:2,0:3,0”
Note that 6 will be rounded up to the nearest 2n (i.e. to 8). If we’d written 8, we would have gotten the
same result.
The choice vector (fourth argument above) indicates that
bit 0 from attribute 0 produces bit 0 of the bit 1 from attribute 0 produces bit 1 of the bit 0 from attribute 1 produces bit 2 of the bit 1 from attribute 1 produces bit 3 of the bit 0 from attribute 2 produces bit 4 of the bit 0 from attribute 3 produces bit 5 of the
The following diagram illustrates this scenario:
MA hash value MA hash value MA hash value MA hash value MA hash value MA hash value
The above choice vector only specifies 6 bits of the combined hash, but combined hashes contain 32 bits. The remaining 26 entries in the choice vector are automatically generated by cycling through the attributes and taking bits from the high-order hash bits from each of those attributes.
An insert command
Reads tuples, one per line, from standard input and inserts them into the relation specified on the
command line. Tuples all take the form val1,val2,…,valn. The values can be any sequence of characters except ‘,’ and ‘?’.
The bucket where the tuple is placed is determined by the appropriate number of bits of the combined hash value. If the relation has 2d data pages, then d bits are used. If the specified data page is full, then the tuple is inserted into an overflow page of that data page.
A select command
Takes a “query tuple” on the command line, and finds all tuples in either the data pages or overflow pages that match the query. Queries take the form val1,val2,…,valn, where some of the vali can be ‘?’ (without the quotes). Such “attributes” represent wild-cards and can match any value in the corresponding attribute position. Some example query tuples, and their interpretation are given below. You can find more examples in the lecture slides and course notes.
A MALH relation R is represented by three physical files: R.info containing global information such as
a count of the number of attributes
the depth of main data file (d for linear hashing)
the page index of the split pointer (sp for linear hashing)
a count of the number of main data pages
the total number of tuples (in both data and overflow pages) the choice vector (cv for multi-attribute hashing)
R.data containing data pages, where each data page contains
offset of start of free space
overflow page index (or NO_PAGE if none) a count of the number of tuples in that page the tuples (as comma-separated C strings)
R.ovflow containing overflow pages, which have the same structure as data pages
When a MALH relation is first created, it is set to contain a 2n pages, with depth d=n and split pointer sp=0. The overflow file is initially empty. The following diagram shows an MALH file R with initial state with n=2.
?,?,? # matches any tuple in the relation
10,?,? # matches any tuple with 10 as the value of attribute 0
?,abc,? # matches any tuple with abc as the value of attribute 1
10,abc,? # matches any tuple with 10 and abc as the values of attributes 0 and 1
After 294 tuples have been inserted, the file might have the following state (depending on field value distributions, tuple sizes, etc):
Pages in MALH files have the following structure: a header with three unsigned integers, strings for all of the tuple data, free space containing no tuple data. The following diagram gives an exmple of this:
We have developed some infrastructure for you to use in implementing multi-attribute linear-hashed (MALH) files. You may use this infrastructure or replace parts of it (or all of it) with your own, but your MALH files implementation must conform to the conventions used in our code. In particular, you should preserve the interfaces to the supplied modules (e.g. Reln, Page, Query, Tuple) and ensure that your submitted ADTs work with the supplied code in the create, insert and select
Setting Up
You should make a working directory for this assignment and put the supplied code there. Read the supplied code to make sure that you understand all of the data types and operations used in the system.
You should see the following files in the directory:
create.c … a main program that creates a new MALH relation dump.c … a main program that lists all tuples in an MALH relation insert.c … a main program that reads tuples and insert them select.c … a main program that finds tuples matching a PMR query stats.c … a main program that prints info about an MAH relation gendata.c … a main program to generate random tuples
bits.h, bits.c … an ADT for bit-strings
chvec.h, chvec.c … an ADT for choice vectors
hash.h, hash.c … the PostgreSQL hash function
page.h, page.c … an ADT for data/overflow pages
query.h, query.c … an ADT for query scanners (incomplete) reln.h, reln.c … an ADT for relations (partly complete) tuple.h, tuple.c … an ADT for tuples (partly complete) util.h, util.c … utility functions
This gives you a partial implementation of MALH files; you need to complete the code so that it provides the functionality described below.
The supplied code actually produces executables that work somewhat, but are missing a working query scanner implementation (from query.c), a proper MA hash function (from tuple.c), and splitting and data file increase (from reln.c). Effectively, they give a static hash file structure with overflows.
$ mkdir Your/ass2/Directory
$ cd Your/ass2/Directory
$ unzip /web/cs9315/24T1/assignments/ass2/ass2.zip
To build the executables from the supplied code, do the following:
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc -Wall -Werror -g -std=c99
gcc create.o query.o page.o reln.o tuple.o util.o chvec.o hash.o bits.o -o
-c -o create.o create.c
-c -o query.o query.c
-c -o page.o page.c
-c -o reln.o reln.c
-c -o tuple.o tuple.c
-c -o util.o util.c
-c -o chvec.o chvec.c
-c -o hash.o hash.c
-c -o bits.o bits.c
This should not produce any errors on the CSE servers; let me know ASAP if this is not the case. Once you have the executables, you could build a sample database as follows:
$ ./create R 3 4 “0,0:0,1:0,2:1,0:1,1:2,0” cv[0] is (0,0)
cv[1] is (0,1)
cv[2] is (0,2)
cv[3] is (1,0)
cv[4] is (1,1)
cv[5] is (2,0)
cv[6] is (0,31)
cv[7] is (1,31)
cv[8] is (2,31)
cv[30] is (0,23)
cv[31] is (1,23)
This command creates a new table called R with 3 attributes. It will be stored in files called R.info, R.data and R.ovflow. The data file initially has 4 pages (so depth d=2). The overflow file is initially empty. The lower-order 6 bits of the choice vector are given on the command line; the remaining bits are auto-generated. Given the file size (4 pages), only two of the hash bits are actually needed.
You could check the status of the files for table R via the stats command:
Since the file is size 2d, the split pointer sp = 0. The rest of the global information should be self explanatory, as should the choice vector. The bucket info shows a quadruple for each page; since there are no overflow pages (yet), only data pages appear. The pageID value in each quad consists
$ ./stats R
Global Info:
#attrs:3 #pages:4 #tuples:0 d:2 sp:0
Choice vector 0,0:0,1:0,2:1,0:1,1:2,0:0,31:1,31:2,31:0,30:1,30:2,30:0,29:1,29:2,29:0,28:1,28: 0,27:1,27:2,27:0,26:1,26:2,26:0,25:1,25:2,25:0,24:1,24:2,24:0,23:1,23
Bucket Info:
# Info on pages in bucket
(pageID,#tuples,freebytes,ovflow)
0 (d0,0,1012,-1)
1 (d1,0,1012,-1)
2 (d2,0,1012,-1)
3 (d3,0,1012,-1)
gcc -Wall -Werror -g -std=c99 -c -o dump.o dump.c
gcc dump.o query.o page.o reln.o tuple.o util.o chvec.o hash.o bits.o
gcc -Wall -Werror -g -std=c99 -c -o insert.o insert.c
gcc insert.o query.o page.o reln.o tuple.o util.o chvec.o hash.o bits.o
gcc -Wall -Werror -g -std=c99 -c -o select.o select.c
gcc select.o query.o page.o reln.o tuple.o util.o chvec.o hash.o bits.o
gcc -Wall -Werror -g -std=c99 -c -o stats.o stats.c
gcc stats.o query.o page.o reln.o tuple.o util.o chvec.o hash.o bits.o
gcc -Wall -Werror -g -std=c99 -c -o gendata.o gendata.c
gcc gendata.o query.o page.o reln.o tuple.o util.o chvec.o hash.o bits.o
of the character ‘d’ (indicating a data file), plus the page index. Each page is 1024 bytes long, which includes a small header, plus 1012 bytes of free space for tuples. There are currently zero tuples in any of the pages. The overflow page IDs are all -1 (for NO_PAGE) to indicate that no data page has an overflow page.
You can insert data into the table using the insert command This command reads tuple from its standard input and inserts them into the named table. For example, the command below inserts a single tuple into the R MALH files:
The insert command prints the hash value for the tuple (based on just the first attribute), and then inserts it into the file. Since the table is currently empty, this tuple will be inserted into page 0. Why page 0? You should be able to answer this by knowing the depth and the hash value. If you then check with the stats command you will see that there is a single tuple in the files, and it’s in page 0.
Typing many individual tuples is tedious, so we have provided a command, gendata, which can generate tuples appropriate for a given table. It takes four comand line arguments, only two of which are compulsory: the number of tuples to generate, and the number of attributes in each tuple. a sample usage:
This generates five tuples, each with three attributes. The first attribute is a unique ID value; the other attributes are random words. You can modify the starting ID value and the seed for the random number generator from the command line.
You could use gendata to generate large numbers of tuples, and insert them as follows:
$ ./insert R
100,abc,xyz
hash(100) = 00011100 00101000 10100111 11101100 Ctl-D
$ ./gendata 5 3 1,sandwich,pocket 2,circus,spectrum 3,snail,adult 4,crystal,fungus 5,bowl,surveyor
$ ./gendata 250 3 101 | ./insert R
hash(101) = 11110100 01100100 11010000 00110000 hash(102) = 00100101 10100110 10100001 11100100 hash(103) = 10110011 11001111 10100111 00001000 hash(104) = 00001100 11100000 10000011 11000000 …
hash(348) = 11110000 01011110 01000010 00101001 hash(349) = 01101101 01100101 00011111 10100111 hash(350) = 10011011 01100101 01111001 11001000
This will insert 250 tuples into the table, with ID values starting at 101. You can check the final state of the database using the stats command. It should look something like:
$ ./stats R
This shows that each data page has one overflow page, and that each data page has roughly the same number of tuples. The bucket starting at data page 0 has a few more tuples than th other buckets, because it has more tuples (15) in the overflow page. Note that page IDs in the overflow pages are distinguished by starting with “ov”. Note also that e.g. the data page at position 3 in the data file has an overflow page at position 1 in the overflow file; this is because page 3 filled up before pages 1 and 2.
One other thing to notice here is that the file has not expanded. It still has the 4 original data pages. Even if you added thousands of tuples, it would still have only 4 data pages. This is because linear hashing is not yet implemented. Implementing it is one of your tasks.
You could then use the select command to search for tuples using a command like: $ ./select R ‘101,?,?’
This aims to find any tuple with 101 as the ID value; there will be one such tuple, since ID values are unique. This returns no solutions because query scanning is not yet implemented. Implementing it is another of your tasks.
Task 1: Multi-attribute Hashing
The current hash function does not use the choice vector to produce a combined hash value. It simply uses the hash value of the first attribute (the ID value) to generate a hash for the tuple. Your first task is to modify the tupleHash() function to use the relevant bits from each attribute hash value to form a composite hash. The choice vector determines the “relevant” bits. You can find more details on how a multi-attribute hash value is produced in the lecture slides and notes.
Task 2: Selection (Querying)
The query scan data type is found in query.c and query.h and is used only in select.c. At present, the data type is incomplete. You need to design a suitable query scanning data structure and implement the operations on it. The functions contain rough approximations to the algorithms you will need to build; you can find more details in the lecture slides and course notes. Most (all?) of the helper functions you’ll need are in other data types, but you can add any others that you find necessary.
Task 3: Linear Hashing
Global Info:
#attrs:3 #pages:4 #tuples:251 d:2 sp:0
Choice vector
0,0:0,1:0,2:1,0:1,1:2,0:0,31:1,31:2,31:0,30:1,30:2,30:0,29:1,29:2,29:0,28:1,28:
0,27:1,27:2,27:0,26:1,26:2,26:0,25:1,25:2,25:0,24:1,24:2,24:0,23:1,23
Bucket Info:
# Info on pages in bucket
(pageID,#tuples,freebytes,ovflow)
[ 0] (d0,56,4,0) -> (ov0,15,737,-1)
[ 1] (d1,57,2,3) -> (ov3,2,981,-1)
[ 2] (d2,59,1,2) -> (ov2,2,976,-1)
[ 3] (d3,54,7,1) -> (ov1,6,905,-1)
As noted above, the current implementation is essentially a static version of single-attribute hashing. You need to add functionality to ensure that the file expands after every c insertions, where c is the page capcity c = floor(B/R) ¡Ö 1024/(10*n) where n is the number of attributes. Add one page at the end of the file and distribute the tuples in the “buddy” page (at index 2d less) between the old and new pages. Determine where each tuple goes by considering d+1 bits of the hash value. This will involve modifying the addToRelation() function, and will most likely require you to add new functions into the reln.c file (and maybe other files).
You can simplify the standard version of linear hashing by not removing overflow pages from the overflow chain of the data page they are attached to. This may result in some data pages having multiple empty overflow pages; this is ok if they are eventually used to hold more tuples.
The following diagram shows an example of what might occur during a page split:
How we Test your Submission We will compile your submission for testing as follows:
We will then run a range of tests to check that your program meets the requirements given above. Since we are using the original create.c, etc., your code must work with them. The easiest way to
ensure this is to not change these files while you’re working on the assignment.
Submission
You need to submit a single tar file containing all of the code files that are needed to build the
$ unzip YourAss2.zip
$ tar xf OurMainPrograms.tar
# extracts our copies of …
# create.c dump.c insert.c select.c stats.c $ make
# should produce executables …
# create dump insert select stats
create, dump, insert, select and stats commands.
Note that we will use the original versions of create.c, dump.c, insert.c, select.c, stats.c, and gendata.c for testing your code. This means that any functions you write must use the same interface as defined in the ADT *.h files.
When you want to submit your work, do the following:
Once you have generated the ass2.zip file, you can submit it via Webcms3 or the give command. If you creathe tar file as above it will most likely contain create.c; this harmless as we will over-
write them with our versions before testing. Have fun, jas
$ cd Your/ass2/Directory
$ zip ass2.zip Makefile *.c *.h
程序代写 CS代考 加微信: powcoder QQ: 1823890830 Email: powcoder@163.com