No Slide Title
Silberschatz, Galvin and Gagne ©2009
Operating System Concepts – 8th Edition,
Deadlocks
*
Deadlocks
The Deadlock Problem
System Model
Deadlock Characterization
Methods for Handling Deadlocks
Deadlock Prevention
Deadlock Avoidance
Deadlock Detection
Recovery from Deadlock
*
Chapter Objectives
To develop a description of deadlocks, which prevent sets of concurrent processes from completing their tasks
To present a number of different methods for preventing or avoiding deadlocks in a computer system
*
The Deadlock Problem
A set of blocked processes each holding a resource and waiting to acquire a resource held by another process in the set
Example
System has 2 disk drives
P1 and P2 each hold one disk drive and each needs another one
Example
semaphores A and B, initialized to 1
P0 P1
wait (A); wait(B)
wait (B); wait(A)
*
Bridge Crossing Example
Traffic only in one direction
Each section of a bridge can be viewed as a resource
If a deadlock occurs, it can be resolved if one car backs up (preempt resources and rollback)
Several cars may have to be backed up if a deadlock occurs
Starvation is possible
Note – Most OSes do not prevent or deal with deadlocks
*
System Model
Resource types R1, R2, . . ., Rm
CPU cycles, memory space, I/O devices
Each resource type Ri has Wi instances.
Each process utilizes a resource as follows:
request
use
release
*
Deadlock Characterization
Mutual exclusion: only one process at a time can use a resource
Hold and wait: a process holding at least one resource is waiting to acquire additional resources held by other processes
No preemption: a resource can be released only voluntarily by the process holding it, after that process has completed its task
Circular wait: there exists a set {P0, P1, …, P0} of waiting processes such that P0 is waiting for a resource that is held by P1, P1 is waiting for a resource that is held by
P2, …, Pn–1 is waiting for a resource that is held by
Pn, and P0 is waiting for a resource that is held by P0.
Deadlock can arise if four conditions hold simultaneously.
*
Resource-Allocation Graph
V is partitioned into two types:
P = {P1, P2, …, Pn}, the set consisting of all the processes in the system
R = {R1, R2, …, Rm}, the set consisting of all resource types in the system
request edge – directed edge P1 Rj
assignment edge – directed edge Rj Pi
A set of vertices V and a set of edges E.
*
Resource-Allocation Graph (Cont.)
Process
Resource Type with 4 instances
Pi requests instance of Rj
Pi is holding an instance of Rj
Pi
Pi
Rj
Rj
*
Example of a Resource Allocation Graph
*
Resource Allocation Graph With A Deadlock
*
Graph With A Cycle But No Deadlock
*
Basic Facts
If graph contains no cycles no deadlock
If graph contains a cycle
if only one instance per resource type, then deadlock
if several instances per resource type, possibility of deadlock
*
Methods for Handling Deadlocks
Ensure that the system will never enter a deadlock state
Allow the system to enter a deadlock state and then recover
Ignore the problem and pretend that deadlocks never occur in the system; used by most operating systems, including UNIX
*
Deadlock Prevention
Mutual Exclusion – not required for sharable resources; must hold for nonsharable resources
Hold and Wait – must guarantee that whenever a process requests a resource, it does not hold any other resources
Require process to request and be allocated all its resources before it begins execution, or allow process to request resources only when the process has none
Low resource utilization; starvation possible
Restrain the ways request can be made
*
Deadlock Prevention (Cont.)
No Preemption –
If a process that is holding some resources requests another resource that cannot be immediately allocated to it, then all resources currently being held are released
Preempted resources are added to the list of resources for which the process is waiting
Process will be restarted only when it can regain its old resources, as well as the new ones that it is requesting
Circular Wait – impose a total ordering of all resource types, and require that each process requests resources in an increasing order of enumeration
*
Deadlock Avoidance
Simplest and most useful model requires that each process declare the maximum number of resources of each type that it may need
The deadlock-avoidance algorithm dynamically examines the resource-allocation state to ensure that there can never be a circular-wait condition
Resource-allocation state is defined by the number of available and allocated resources, and the maximum demands of the processes
Requires that the system has some additional a priori information
available
*
Safe State
When a process requests an available resource, system must decide if immediate allocation leaves the system in a safe state
System is in safe state if there exists a sequence
*
Example: P1 Request (1,0,2)
Check that Request Available (that is, (1,0,2) (3,3,2) true
Allocation Need Available
A B C A B C A B C
P0 0 1 0 7 4 3 2 3 0
P1 3 0 2 0 2 0
P2 3 0 1 6 0 0
P3 2 1 1 0 1 1
P4 0 0 2 4 3 1
Executing safety algorithm shows that sequence < P1, P3, P4, P0, P2> satisfies safety requirement
Can request for (3,3,0) by P4 be granted?
Can request for (0,2,0) by P0 be granted?
*
Deadlock Detection
Allow system to enter deadlock state
Detection algorithm
Recovery scheme
*
Single Instance of Each Resource Type
Maintain wait-for graph
Nodes are processes
Pi Pj if Pi is waiting for Pj
Periodically invoke an algorithm that searches for a cycle in the graph. If there is a cycle, there exists a deadlock
An algorithm to detect a cycle in a graph requires an order of n2 operations, where n is the number of vertices in the graph
*
Resource-Allocation Graph and Wait-for Graph
Resource-Allocation Graph
Corresponding wait-for graph
*
Several Instances of a Resource Type
Available: A vector of length m indicates the number of available resources of each type.
Allocation: An n x m matrix defines the number of resources of each type currently allocated to each process.
Request: An n x m matrix indicates the current request of each process. If Request [ij] = k, then process Pi is requesting k more instances of resource type. Rj.
*
Detection Algorithm
1. Let Work and Finish be vectors of length m and n, respectively Initialize:
(a) Work = Available
(b) For i = 1,2, …, n, if Allocationi 0, then
Finish[i] = false;otherwise, Finish[i] = true
2. Find an index i such that both:
(a) Finish[i] == false
(b) Requesti Work
If no such i exists, go to step 4
*
Detection Algorithm (Cont.)
3. Work = Work + Allocationi
Finish[i] = true
go to step 2
4. If Finish[i] == false, for some i, 1 i n, then the system is in deadlock state. Moreover, if Finish[i] == false, then Pi is deadlocked
Algorithm requires an order of O(m x n2) operations to detect whether the system is in deadlocked state
*
Example of Detection Algorithm
Five processes P0 through P4; three resource types
A (7 instances), B (2 instances), and C (6 instances)
Snapshot at time T0:
Allocation Request Available
A B C A B C A B C
P0 0 1 0 0 0 0 0 0 0
P1 2 0 0 2 0 2
P2 3 0 3 0 0 0
P3 2 1 1 1 0 0
P4 0 0 2 0 0 2
Sequence
*
Example (Cont.)
P2 requests an additional instance of type C
Request
A B C
P0 0 0 0
P1 2 0 1
P2 0 0 1
P3 1 0 0
P4 0 0 2
State of system?
Can reclaim resources held by process P0, but insufficient resources to fulfill other processes; requests
Deadlock exists, consisting of processes P1, P2, P3, and P4
*
Detection-Algorithm Usage
When, and how often, to invoke depends on:
How often a deadlock is likely to occur?
How many processes will need to be rolled back?
one for each disjoint cycle
If detection algorithm is invoked arbitrarily, there may be many cycles in the resource graph and so we would not be able to tell which of the many deadlocked processes “caused” the deadlock
*
Recovery from Deadlock: Process Termination
Abort all deadlocked processes
Abort one process at a time until the deadlock cycle is eliminated
In which order should we choose to abort?
Priority of the process
How long process has computed, and how much longer to completion
Resources the process has used
Resources process needs to complete
How many processes will need to be terminated
Is process interactive or batch?
*
Recovery from Deadlock: Resource Preemption
Selecting a victim – minimize cost
Rollback – return to some safe state, restart process for that state
Starvation – same process may always be picked as victim, include number of rollback in cost factor
*