Specification
Here’s a technical specificiation for your assignment.
Copyright By PowCoder代写 加微信 powcoder
Your program:
must be written in ARMv7 assembly using the assignment template (link)
must use the LEDs to create a light show that changes over time
must be engaging for a viewer for at least 30 seconds
must never stop (it can repeat or loop)
must work when the microbit is powered over USB but not connected to a computer (that is, it works after you upload it and plug into a USB charger)
should use memory to help create an engaging show
To limit the scope, here’s some should nots. Your program:
should not use the buttons
should not use the motion sensor
should not use any input peripherals on the microbit
Finally, you program must be accompanied by a design document (maximum: 600 words). The design document must explain:
what your design is (and how it meets the assignment specification)
how you accomplished it
why your design choices were appropriate for the task
You must follow the assignment specification for this project (both shoulds and should nots). Our expectation is with the above limitations every student will come up with a unique light show.
Rules and Policies
this is an individual assessment task
late submission is not permitted without an extension
Marking Criteria
Your assignment will be evaluated on the following criteria:
Sophistication of your design and how it meets the assignment specification. (20%)
Sophistication of your implementation in ARM-v7 assembly language. (50%)
Sophistication of analysis and evaluation of why your implementation is correct and appropriate for your design and what limitations it might have. (20%)
Sophistication of communication and expression. (10%)
Item 2 will be evaluated primarily through your program code. Items 1, 3, and 4 will be evaluated through your design document.
Submission
Submission is through GitLab, the most recently pushed commit of your fork of the assignment template before the deadline is taken to be your assignment submission.
Getting Started
read this assignment page completely
fork and clone the assignment template
complete the presubmission task (see the Assignment Pres-submission page): fill in your design-proposal.md file then commit and push it.
have a look at the “blinky” lab and think about how you can turn the other LEDs on and off
think about how you can add more sophisticated patterns of LEDs within the main loop of your program
try some LED patterns and see what you think is “engaging”
make a mistake or get stuck, then ask a good question on the course forum.
Ideas for Extensions
So you’ve made a basic light show and now you want to take it to the next level? Here’s some ideas for making a sophisticated idea:
use persistence of vision to display images with the whole screen (not just a couple of pixels that can be independently addressed)
use pulse width modulation to adjust the brightness of the LEDs
write a program that creates patterns that continually change (i.e., a generative pattern)
implement a random number generator to make your show change each time you turn on the microbit
use the speaker to create an interesting synthesised sound to go with your visualisation
These are only a couple of extension ideas, if you have any other great ideas feel free to chat with us on the course forum course forum.
you have tested that your code works when “uploaded” to a microbit and when the microbit is plugged into a USB charger or power bank
you have checked with at least one other person that your show is engaging for at least 30 seconds (show your family! good chance to show off what you’re learning at uni!)
you have committed and pushed your program code to your own fork of the assignment template
you have filled out, committed, and pushed design-document.md
you have filled out, committed, and pushed your statement of originality.
you have check that the files in your fork of the template on the gitlab website are the correct versions of the files you intend to submit.
Do I have to write a design document?
Yes! 50% of the marks for this assignment are evaluated through the design document. If you don’t write one you will get zero for that half of the assignment.
How do I write a design document?
Have a look at the design document page for advice.
Make sure you are answering the questions in the specification and stay within the word limit.
Writing a clear and concise document is a challenge, but we believe in you.
What do you mean by “engaging for at least 30 seconds”?
We don’t mean that you need to have an animation that lasts exactly 30 seconds. We mean that your work has to be interesting for at least 30 seconds. Repeating or looping things can definitely be interesting. This is one you will need to test to know, show a friend and see how long they spend looking at your show. If it’s only 5 seconds then maybe you have some work to do 🙂
I’ve done X, is that good enough to get Y marks?
We don’t give out marks before assignments are completed, but it’s fair to wonder “How hard should I work on this?”
Realistically there are ways to complete this assignment with minor modification of what you have done in labs. Those types of submissions will be likely to get in the range of 50-59 indicating “satisfactory” performance, but not what we would call “good”.
Putting in a normal amount of further effort to create a submission that is “good” or “very good” will result in a mark between 60-79. Most students will be in this category. Don’t neglect your design document as explaining your program is worth the same number of marks as the program itself.
Getting higher than 79 requires an “excellent” submission across all marking criteria. This requires sophisticated engagement with the task and probably some kind of extension.
For very high marks (90+): “we know it when we see it”. Only a few students will be in this category and they will have definitely put in a lot of effort to create a sophisticated extension on the basics. They will also have written an impeccable design document.
At the opposite end of the scale, if we see a submission that doesn’t meet the specification (e.g., it’s only a static LED display, or there is a very weak design document), then the mark will be below 50. Hopefully, there are only a few students in this category.
Sorry that we can’t be more specific than that.
My program doesn’t work, can I email you for help?
Sorry, you won’t get help over email or Teams. We provide a course forum which is the only way we are able to help.
Forum posts related to your assignment submission must be “private to instructors” (as for any individual assessment task).
Do I have to use memory? It seems hard.
It’s not required, but we seriously suggest that you do.
We’ve seen a lot of students avoid using memory because it’s slightly more complicated than using registers.
In the context of the course, this is a big mistake. Practicing how to str and ldr in assignment 1 will make a big difference in your ability to complete the later tasks in the course.
Realistically, there’s a very limited number of registers on the microbit and many tasks are made easier by using memory at the appropriate time.
It’s [5 minutes, 60 minutes, 12 hours] before the deadline and my CI Jobs aren’t finishing!
Unfortunately on the day that an assignment is due, when many students are pushing updates at once, the CI servers can’t keep up. You may not see your CI jobs finish before the deadline. You will just have to manually check that your files have been submitted correctly.
If there’s any issues with your git repository after the deadline. Please let us know (after the deadline) through a private piazza post and there may be something we can do.
How do I know my assignment has been submitted?
the files in your fork of the assignment are correct (i.e., the files you intend to submit) when checking on the gitlab website
the time is before the deadline
then your assignment has been submitted (well done!).
Please don’t ask us to “check”, we would be just doing exactly the same thing as the above steps which you can do yourself.
程序代写 CS代考 加微信: powcoder QQ: 1823890830 Email: powcoder@163.com