CIS 547 – The LLVM Framework
CIS 547 – Software Analysis
Copyright By PowCoder代写 加微信 powcoder
Introduction to Software Analysis
The LLVM Framework
Random Input Generation
Delta Debugging
Statistical Debugging
Dataflow Analysis
Pointer Analysis
Constraint-Based Analysis
Dynamic Symbolic Analysis
Introduction to Software Analysis
The LLVM Framework
Software Specifications
Random Testing
Delta Debugging
Statistical Debugging
Dataflow Analysis – Part I
Dataflow Analysis – Part II
Pointer Analysis
Constraint-Based Analysis
Automated Test Generation
Type Systems – Part I
Type Systems – Part II
Dynamic Symbolic Execution
Lab 2: The LLVM Framework
Building an understanding of the LLVM framework: IR, API, and the toolchain.
The objective of this lab is three-fold:
Understanding a representation of C programs called LLVM IR that we
will use in our labs.
It is the intermediate representation used by LLVM, a popular compiler
framework for a variety of programming languages.
Understanding the LLVM API by using it to write a LLVM pass
and running it to statically find all the binary operators in a program and
instrument them.
Understanding the differences between static and dynamic properties of a program,
by executing instrumented code.
Pre-Requisites
Read the LLVM Primer: Part I (Overview of LLVM) and Part II
(Structure of LLVM IR).
This is required for the first part of this lab as well as throughout the rest
of the course to be able to read LLVM IR for debugging purposes.
Keep LLVM Primer: Part III (The LLVM API) at hand as a quick
reference for most of the LLVM API used in this lab and also throughout the course.
Navigate to the lab2 folder on your computer and open it in VS code.
Press F1 key to display a search bar, search and select Reopen in Container.
This will set up the development environment for this lab in VS Code.
Inside the development environment the skeleton code for Lab 2 will be locate
under /lab2.
Afterwards, if VS Code prompts you to select a kit for the lab then pick Clang 8.
Part 1: Understanding the LLVM IR
Study the LLVM Primer to understand the structure of the LLVM IR.
The primer shows how to run clang on a sample C program to generate the
corresponding LLVM IR program.
You can use the C programs under /lab2/test directory to try it out:
/lab2$ cd test
/lab2/test$ clang -emit-llvm -S -fno-discard-value-names -c simple0.c
clang is a compiler front-end for C that uses LLVM as a back-end.
The user manual of clang has a useful reference to its
command-line options.
-S instructs clang to perform preprocessing and compilation steps only
-emit-llvm instructs the compiler to generate LLVM IR
(which will be saved to simple0.ll)
-fno-discard-value-names preserves names of values in the generated
LLVM for improving readability.
Write by hand the C programs corresponding to the LLVM IR programs
under the /lab2/ir_programs directory by filling in the provided
template code in the /lab2/c_programs directory.
Ensure that running the above command on your hand-written C programs
generates the exact LLVM IR programs provided as we will auto-grade them.
You can do so by using the diff command-line utility to check if your
files are the same.
/lab2$ cd c_programs
/lab2/c_programs$ clang -emit-llvm -S -fno-discard-value-names -c test1.c
/lab2/c_programs$ diff test1.ll ../ir_programs/test1.ll
Alternatively you can let the provided Makefile automatically do this for you:
/lab2/c_programs$ make test1
Part 2: Understanding the LLVM API
In this and future labs, we will use CMake, a modern tool for managing the
build process.
If you are unfamiliar with CMake, you are strongly advised to read the
CMake tutorial first (especially Step 1 and Step 2 in the
tutorial).
Running cmake produces a Makefile that you might be more familiar with.
If not, read the Makefile tutorial before proceeding.
Once a Makefile is generated, you need only call make to rebuild your project
after editing the source files.
Run the following commands to set up this part of the lab:
/lab2$ mkdir -p build && cd build
/lab2/build$ cmake ..
/lab2/build$ make
You should see several files created in the lab2/build directory.
Among other files, this builds two LLVM pass named DynamicAnalysisPass.so
and StaticAnalysisPass.so from code that we have provided in
lab2/src/DynamicAnalysisPass.cpp and lab2/src/StaticAnalysisPass.cpp
(you will modify both these files in this lab), and a runtime library,
named libruntime.so that provides some functions that are used in the lab.
The remaining steps follow the depicted workflow from left to right:
As noted in Step 1, you will implement the functionality of this lab as two
LLVM passes called StaticAnalysisPass and DynamicAnalysisPass.
LLVM passes are subprocesses of the LLVM framework.
They usually perform transformations, optimizations, or analyses on programs.
Each pass operates on the LLVM IR representation of the input program.
So, to exercise this lab on an input C program, you must first compile the
program to LLVM IR, as you did in Part 1:
/lab2$ cd test
/lab2/test$ clang -emit-llvm -S -fno-discard-value-names -c -o simple0.ll
simple0.c -g
Next, we use opt to run the provided StaticAnalysisPass pass on the compiled C program:
/lab2/test$ opt -load ../build/StaticAnalysisPass.so -StaticAnalysisPass -S
simple0.ll -o simple0.static.ll
opt is an LLVM tool that performs analyses and optimizations on LLVM IR.
The option -load loads our LLVM pass library while -StaticAnalysisPass instructs
opt to run the pass on simple0.ll.
(Libraries can and often do contain multiple LLVM passes.)
Consult the documentation of opt to understand the potential ways to use
the tool; it may help you build and debug your solutions.
Similarly, we use opt to run the provided DynamicAnalysisPass pass on the
compiled C program:
/lab2/test$ opt -load ../build/DynamicAnalysisPass.so -DynamicAnalysisPass -S
simple0.ll -o simple0.dynamic.ll
The program produced in simple0.static.ll should be identical to simple0.ll
while the program in simple0.dynamic.ll won’t be for this lab.
You can use diff to verify this:
/lab2/test$ diff simple0.static.ll simple0.ll
< ; ModuleID = 'simple0.ll'
> ; ModuleID = ‘simple0.c’
/lab2/test$ diff simple0.dynamic.ll simple0.ll
Next, compile the instrumented program and link it with the provided runtime
library to produce a standalone executable named simple0:
/lab2/test$ clang -o simple0 -L../build -lruntime simple0.dynamic.ll
Finally run the executable on the empty input; note that you may have to manually
provide test input for programs that expect non-empty input:
/lab2/test$ ./simple0
In this lab, you will add your code to src/StaticAnalysisPass.cpp and
src/DynamicAnalysisPass.cpp.
The provided StaticAnalysisPass reports the location of all instructions in the
program and you will be implementing functionality to report the location, type and
operands of every binary operator in a program.
The provided DynamicAnalysisPass modifies the program in a manner such that when
executing the program, it will report whenever an instruction is executed by printing
the line and column number of the instruction to a coverage file.
You will be implementing additional functionality that modifies a program to also
report the location, type and the runtime values of the operands of a binary operator
when it is executed.
We will specify the exact output format in the next section but after completion your
output for StaticAnalysisPass on simple0.c should be:
Running Static Analysis Pass on function main
Locating Instructions
Division on Line 4, Column 13 with first operand %0 and second operand %1
You may notice here that multiple instructions can have the same location.
We will explore the reasoning behind this later in the document.
After completing DynamicAnalysisPass, executing simple0 should create two files:
simple0.cov and simple0.binops with the following contents:
# simple0.cov
# simple0.binops
Division on Line 4, Column 13 with first operand=3 and second operand=2
Lab Instructions
Static Analysis
As mentioned previously, you are provided with src/StaticAnalysisPass.cpp that
contains one static analysis that reports the location of all instructions in the
program, and you will be adding another analysis to it.
First spend some time to understand the provided analysis that prints out the location
of all Instructions, the LLVM primer will be helpful for understanding the API’s used
Next you will implement a static analysis that prints out the kind, location and the
operands of every instructions of type BinaryOperator and print in the following
Division on Line 4, Column 13 with first operand %0 and second operand %1
operand
You will find the functions getBinOpSymbol and getBinOpName from Utils.h
helpful in doing this, it is recommended that you take a glance at the implementation
of getBinOpSymbol.
You can use the variable function from Utils.h to get the name of an operand from
its corresponding LLVM Value.
Dynamic Analysis
It involves inspecting a running program for information about its state and
behavior during runtime; this is in contrast to static analysis which analyzes
the properties of code independent of any execution.
One way to inspect the runtime behavior of a program is by injecting code into
the program during compile time; this technique falls under the umbrella term
instrumentation.
For both static analysis in src/StaticAnalysisPass.cpp we will have a corresponding
dynamic analysis instrumentation in src/DynamicAnalysisPass.cpp.
We have provided you with an implementation for the first analysis which injects a
call to __coverage__ function before every instruction, this function stores the
line and column of the executing instruction to a coverage file.
Study the implementation to understand the APIs used for injecting the function.
You will implement a dynamic analysis that tracks the kind, location as well as the
runtime values of the operands to a binary operator.
For this you will have to check if an instruction is a BinaryOperator and instrument
it with the instrumentBinOpOperands function, which you will be implementing next.
The instrumentBinOpOperands function has to inject calls to __binop_op__ before
every binary operator.
You can see that __binop_op__ takes 5 arguments, namely, a symbol for the operator,
the line and column of the operation and the runtime values of the two operands.
You can use the getBinOpSymbol function to get the symbol corresponding to the
In order to get the runtime values of the operands, it is necessary to keep in mind
that in LLVM a variable defined by an instruction is represented by the
instruction itself.
Code Coverage Primer
Code coverage is a measure of how much of a program’s code is executed in a
particular run.
There are a number of different criterias to describe coverage.
In this lab we are providing line coverage and you are implementing an artificial
criteria of tracking binary operators during the execution of a program using the
same mechanisms underlying modern code coverage tools, such as the LLVM’s source-based
code coverage tool and gcov.
It instruments the program’s LLVM IR instructions at compile-time to record the line
and column number of the program’s source-level instructions that are executed at
This seemingly primitive information enables powerful software analysis use-cases.
In the next lab, you will use line coverage information to guide an automated test
input generator, thereby realizing the architecture of modern industrial-strength
Debug Location Primer
When you compile a C program with the -g option, LLVM will include debug information
for LLVM IR instructions.
Using the aforementioned instrumentation techniques, your LLVM pass can gather this
debug information for an Instruction, and use it in your analysis.
We will discuss the specifics of this interface in the following sections.
Instrumentation Pass
We have provided a framework from which you can build your LLVM pass.
You will need to edit the src/DynamicAnalysisPass.cpp file to implement features to
your LLVM Pass.
File lib/runtime.c contains functions that you will inject using your pass:
void __binop_op__(char c, int line, int col, int op1, int op2);
As you will create a dynamic analysis, your pass should instrument the code with calls
to these functions.
In short, to complete DynamicAnalysisPass in this lab you have the following high
level tasks:
Check for binary operators and instrument it using instrumentBinOpOperands.
Implement instrumentBinOpOperands to insert calls to __binop_op__.
Inserting Instructions into LLVM code
Once you are familiar with the organization of LLVM IR, LLVM instructions, and the
Instruction class after finishing Part 1 and completing static analysis You can
start working on DynamicAnalysisPass, for this you will need to use the LLVM API
to insert additional instructions into a program.
There are manys ways to do this in LLVM.
One common pattern when working with LLVM is to create a new instruction and insert
it directly before some instruction.
For example, consider this code snippet:
Instruction* ExistingInstruction = …;
auto *NewInst = new Instruction(…, ExistingInstruction);
A new instruction (NewInst) is created and inserted before an existing
Instruction ExistingInstruction.
Subclasses of Instruction have similar methods for doing this.
In particular, for this lab you can use this pattern to create and insert a call
instruction (CallInst), as discussed below.
You should also take a look at how a call instruction was inserted into a program
in the instrumentCoverage function, as an example of the instructions below.
Loading C functions into LLVM code
We have provided the definition of C functions in the runtime.c file for you, but
you have to inject LLVM instructions to call them from instrumented code.
Before a function can be called within a Module, it has to be loaded into the Module
using the appropriate LLVM API Module::getOrInsertFunction.
One way to do this is illustrated below:
M->getOrInsertFunction(FunctionName, return_type, arg1_type, …, argN_type);
Here, return_type, arg1_type, … argN_type, are variables that describe the
LLVM Type of the arguments to the function.
For example, the C-type int is usually the LLVM Type i32, and char is i8,
boolean is i1.
This step is akin to declaring a function in C or C++.
Next say, you want the function to be called right before some instruction I.
For this you will have to create a call instruction using
CallInst::Create as illustrated below:
Instruction I = …;
auto *NewFunction = M->getFunction(FunctionName);
CallInst::Create(NewFunction, Args, “”, &I);
Here, you should populate std::vector
arguments to the function.
Additionally as previously stated, in LLVM, a variable defined by an instruction is
represented by the instruction itself.
Furthermore, the Instruction class is a subclass of the Value; this makes
passing a variable defined by an Instruction to a function as an argument
relatively straightforward.
Debug Locations
As we alluded previously, LLVM will store code location information of the
original C program for LLVM instructions when compiled with -g.
This is done through the DebugLoc class:
Instruction* I = …;
DebugLoc Debug = I->getDebugLoc();
printf(“Line No: %d\n”, Debug.getLine());
You will need to gather and forward this information to the appropriate functions.
Not every single LLVM instruction corresponds to a specific line in its C source code.
So before using debug information, you generally need to check if an Instruction
actually has it.
Understanding Static and Dynamic Properties of Code
Code has two types of properties, static and dynamic.
Static properties are things that can be inferred from the source representation of
the code and are independent of any specific run of the program.
On the other hand, behavior of code during runtime is captured by its dynamic
properties.
In Part 2, you implement a LLVM pass that statically finds all the binary operators
and its operands; you also implement a LLVM pass that instruments all binary operators
to collect the dynamic property describing which binary operators are executed in a
given run of a program, in what order, and with what operands.
Both static and dynamic properties tell us interesting facts about a program that can
be leveraged in various ways.
In particular, for this course we shall use them to find bugs in a program.
Submission
Once you are done with the lab, you can create a submission.zip file by using
the following command:
/lab2$ make submit
submission.zip created successfully.
Then upload the submission.zip file to Gradescope.
程序代写 CS代考 加微信: powcoder QQ: 1823890830 Email: powcoder@163.com